On Thu, Mar 28, 2019 at 10:25 AM Dinosaur <[email protected]> wrote:
> Hi All > > Posted this on Adafruit Forum, but have been trying to post on this Google > group for some time on other issues, but I never seeem > to see my post anywhere. Hope this is better this time. > > Have just received the second BBB's Rev.C from Adafruit and as I did on > the first, I erased the MMCBLK1 so that it would > not boot on it and not interfere with the libpruio. > Used a good uSD and did: sudo dd if=/dev/zero bs=512 count=1024 > of=/dev/mmcblk1 > > Once that was completed, sudo reboot. > However, the only light that was On and stayed on was the 5vdc power > adapter. > Usually after a few sec's delay all 4 led's come on and the sequence > starts. > Nothing, no amount of button pressing will bring it back to life. > Have of course confirmed the uSD on the other unit and all is ok. > The unit has not even had any connections other then the power. > > Is this a warranty issue, how do I even go about that ? > Grab the latest image, thru: https://beagleboard.org/latest-images use "etcher.io" to write the file to a microSD and retry.. Regards, -- Robert Nelson https://rcn-ee.com/ -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/CAOCHtYiGvTyZVDQj6t5ehyRxo4O5bZvT5dRZBEDXKi8kGoUgiw%40mail.gmail.com. For more options, visit https://groups.google.com/d/optout.
