Good to hear that it is working for you... It's detecting PRUs for me now when booting off the SD card - I just need to get them to start my code and setup /de/rpmsg_31 properly... another hurdle but I'm sure I will overcome.
On Sunday, 26 May 2019 23:33:37 UTC+1, jonre...@gmail.com wrote: > > Okay I managed to get everything working too. I had to do the following > steps: > > 1. reset eMMC > sudo /opt/scripts/tools/developers/update_bootloader.sh > > 2. flash new image provided above > > 3. After that the model from /opt/scripts/tools/version.sh was wrong for > me. I'm using a BBBW but model field had just regular beaglebone black in > it. This prevent wifi (via connman) from working. I followed another post > about this ( > https://groups.google.com/forum/#!topic/beagleboard/_ydry5HYVNQ) which > suggested to reset eeprom: > > GND TP1 then run as root: > > dd > if=/opt/scripts/device/bone/bbbw-eeprom.dump > of=/sys/devices/platform/ocp/44e0b000.i2c/i2c-0/0-0050/eeprom > > reboot. > > Everything works fine now! > > Thanks Robert and Hugh > > On Saturday, May 25, 2019 at 2:37:07 PM UTC-7, Hugh Frater wrote: >> >> Robert, is it ok to use this image in production or should I use the >> current stretch IOT image and flash the eMMC to overwrite this old >> bootloader? >> >> On Saturday, 25 May 2019 20:55:58 UTC+1, RobertCNelson wrote: >>> >>> > This is what I think is relevant from my uBoot console: >>> > >>> > U-Boot SPL 2017.03-00002-gd12b1519b4 (Mar 14 2017 - 10:28:26) >>> > Trying to boot from MMC2 >>> > U-Boot 2017.03-00002-gd12b1519b4 (Mar 14 2017 - 10:28:26 -0500), >>> Build: jenkins- >>> > github_Bootloader-Builder-532 >>> >>> There you go!! Would you please give me a dd copy of the first 100Mb >>> of the eMMC partition.. Such that i can use it to update the >>> version.sh script, to detect this bad version... >>> >>> Regards, >>> >>> -- >>> Robert Nelson >>> https://rcn-ee.com/ >>> >> -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/d8785b07-088a-41de-81eb-159ddf7dec5e%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
