I will try this and report back Robert. I need to get hold of another sd card adapter tomorrow, the card reader in my laptop has decided to stop mounting cards rw... :(
On Thursday, 23 May 2019 17:56:39 UTC+1, RobertCNelson wrote: > > On Thu, May 23, 2019 at 3:39 AM Hugh Frater <[email protected] > <javascript:>> wrote: > > > > OK, back in the office.... > > > > I've tried updating the bootloader, that didn't make a difference. Here > is the output from version.sh > > > > debian@beaglebone:~$ sudo /opt/scripts/tools/version.sh > > [sudo] password for debian: > > git:/opt/scripts/:[c2a5ae96746d10d711c60bc84ba244f4cd7b75c3] > > eeprom:[A335BNLT00C03816BBBK190D] > > model:[TI_AM335x_BeagleBone_Black] > > dogtag:[BeagleBoard.org Debian Image 2018-10-07] > > bootloader:[microSD-(push-button)]:[/dev/mmcblk0]:[U-Boot > 2019.04-00002-g9ca2c5819f]:[location: dd MBR] > > kernel:[4.14.108-ti-r104] > > nodejs:[v6.14.4] > > uboot_overlay_options:[enable_uboot_overlays=1] > > uboot_overlay_options:[disable_uboot_overlay_emmc=1] > > uboot_overlay_options:[disable_uboot_overlay_video=1] > > uboot_overlay_options:[disable_uboot_overlay_audio=1] > > uboot_overlay_options:[disable_uboot_overlay_wireless=1] > > uboot_overlay_options:[disable_uboot_overlay_adc=1] > > > uboot_overlay_options:[uboot_overlay_pru=/lib/firmware/AM335X-PRU-RPROC-4-14-TI-00A0.dtbo] > > > > uboot_overlay_options:[enable_uboot_cape_universal=1] > > pkg check: to individually upgrade run: [sudo apt install --only-upgrade > <pkg>] > > pkg:[bb-cape-overlays]:[4.4.20190429.0-0rcnee0~stretch+20190429] > > pkg:[bb-wl18xx-firmware]:[1.20180517-0rcnee0~stretch+20180517] > > pkg:[kmod]:[23-2rcnee1~stretch+20171005] > > pkg:[librobotcontrol]:[1.0.3-git20181005.0-0rcnee0~stretch+20181005] > > pkg:[firmware-ti-connectivity]:[20170823-1rcnee1~stretch+20180328] > > groups:[debian : debian adm kmem dialout cdrom floppy audio dip video > plugdev users systemd-journal i2c bluetooth netdev cloud9ide gpio pwm eqep > admin spi tisdk we > > ston-launch xenomai] > > cmdline:[console=ttyO0,115200n8 bone_capemgr.uboot_capemgr_enabled=1 > root=/dev/mmcblk0p1 ro rootfstype=ext4 rootwait coherent_pool=1M > net.ifnames=0 quiet] > > dmesg | grep remote > > [ 1.302439] remoteproc remoteproc0: wkup_m3 is available > > [ 1.390494] remoteproc remoteproc0: powering up wkup_m3 > > [ 1.390611] remoteproc remoteproc0: Booting fw image > am335x-pm-firmware.elf, size 217168 > > [ 1.393154] remoteproc remoteproc0: remote processor wkup_m3 is now > up > > dmesg | grep pru > > dmesg | grep pinctrl-single > > [ 0.971836] pinctrl-single 44e10800.pinmux: 142 pins at pa f9e10800 > size 568 > > dmesg | grep gpio-of-helper > > [ 0.983805] gpio-of-helper ocp:cape-universal: ready > > lsusb > > Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub > > END > > > > I'm booting from a micro-sd card and the device is an element 14/farnell > BBB > > With a spare microSD, can you test this image: > > > https://rcn-ee.net/rootfs/bb.org/testing/2019-05-12/stretch-iot/bone-debian-9.9-iot-armhf-2019-05-12-4gb.img.xz > > > Regards, > > -- > Robert Nelson > https://rcn-ee.com/ > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/a76c12a7-5646-4ebc-98bb-1d5d36c77e4a%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
