Dennis, thanks for explaining an option. I have the original image on mSD. 
Can that be used to recreate (copy or build) the proper partition table on 
the eMMC? How is that done? Maybe the data will not be overwritten. If it 
does not work, I will lose all data anyway when reflash all. 

Based on the above dd command (I ran by mistake), maybe from mSD run:
sudo mount /dev/mmcblk1

Then remove mSD and reboot.

But I don't know if I have all the correct parameters such as block size or 
count or destination. Thanks for any help.

Blair

On Monday, June 24, 2019 at 1:12:04 PM UTC-4, Dennis Lee Bieber wrote:
>
> On Sun, 23 Jun 2019 14:25:53 -0700 (PDT), 
> activewh...@gmail.com <javascript:> declaimed the 
> following: 
>
> >It looks bad, but I want to be sure. Is there any way I can access the 
> data 
> >files on the eMMC? And to avoid rebuilding the entire BBB setup? Such as 
> >install U-Boot? Or is all BBB data lost? 
>
>         If you knew what the partition table had been, it might be 
> possible to 
> reflash the first part of the card restoring a partition table. BUT if the 
> data partition starts anywhere in the 100MB region, you've lost any data 
> blocks that had been stored there... And likely will spend hours in fsck 
> rebuilding whatever is still good, followed by copying everything off and 
> then reflashing the eMMC with a complete system which I believe will 
> restore a modern u-boot too (if it didn't, there'd be no way to update old 
> BBBs from kernel device tree loading to u-boot device tree loading). 
>
>
>
> -- 
>         Wulfraed                 Dennis Lee Bieber         AF6VN 
>         wlf...@ix.netcom.com <javascript:>    
> http://wlfraed.microdiversity.freeddns.org/ 
>
>

-- 
For more options, visit http://beagleboard.org/discuss
--- 
You received this message because you are subscribed to the Google Groups 
"BeagleBoard" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to beagleboard+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/beagleboard/179cadaf-f7bb-4611-893b-76e7ec64c81d%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

Reply via email to