Hi,
i am new to beagle bone black board. just after getting new board i
connected that board to my PC using USB cable and checked it is showing
BEAGLE BONE like mass storage drive on system(linux ubuntu), i clicked and
entered in to drive and got one START.HMT file clicked on it, it went to
website and showed next step install drivers..
i downloaded the mkudevrule.sh file and run it by using chmod + x(for
permission) , sudo command , it completed...
i got 73-beagle bone.rules file is created in /etc/udev/rules.d/... after
this i concluded drivers are installed properly..
i am trying to get ip address of BBB , but not able to get?? please suggest
me what is problem:
acufore@acufore-H110M-S2:~$ cd /etc/udev/rules.d/
acufore@acufore-H110M-S2:/etc/udev/rules.d$ ls
73-beaglebone.rules
acufore@acufore-H110M-S2:/etc/udev/rules.d$ cd
acufore@acufore-H110M-S2:~$ ifconfig
enp2s0 Link encap:Ethernet HWaddr e0:d5:5e:11:5d:65
inet addr:192.168.4.59 Bcast:192.168.4.255 Mask:255.255.255.0
inet6 addr: fe80::4508:cbb4:d574:e0c1/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:30922 errors:0 dropped:0 overruns:0 frame:0
TX packets:13579 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:16593168 (16.5 MB) TX bytes:1669767 (1.6 MB)
enx3403de92aa91 Link encap:Ethernet HWaddr 34:03:de:92:aa:91
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:41 errors:3 dropped:0 overruns:0 frame:3
TX packets:2 errors:58 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:10411 (10.4 KB) TX bytes:520 (520.0 B)
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:65536 Metric:1
RX packets:3169 errors:0 dropped:0 overruns:0 frame:0
TX packets:3169 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1
RX bytes:324659 (324.6 KB) TX bytes:324659 (324.6 KB)
acufore@acufore-H110M-S2:~$ ^C
acufore@acufore-H110M-S2:~$
like this i am getting how can i proceed for next..?
--
For more options, visit http://beagleboard.org/discuss
---
You received this message because you are subscribed to the Google Groups
"BeagleBoard" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
To view this discussion on the web visit
https://groups.google.com/d/msgid/beagleboard/6b6eec00-f5d4-49b7-9202-681f328f7199%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
