I'm trying to figure out the cheapest and simplest, Open Hardware-respecting, way to extend the USB 3/USB C interface on the BeagleBone AI, internally with a small hub or board. Basically, I need to attach two SSDs to the USB 3 interface for a RAID 1 mirroring setup. I'm trying to fit this all into a nice NAS-like enclosure I am currently 3D printing.
Of course, I need to also make sure I can use USB C to power the BeagleBone AI board. Any advice would be appreciated. I'm currently looking at these as potential solutions, and I will need these for in bulk/wholesale for an upcoming product: https://www.tindie.com/products/mux/usb-30-nanohub/ https://www.tindie.com/products/mux/microhub-the-smallest-usb-hub-with-connectors/ https://www.alibaba.com/product-detail/Type-C-4-port-94v0-pcb_60769581928.html -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/0752775c-2138-415f-aea1-39ea80e778bd%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
