Looks like the 3rd link will be your best bet. It will turn the USB-C port into a USB-A 3.0 hub that can still power the board.
On Thursday, July 18, 2019 at 9:34:40 AM UTC-5, Sean O'Brien wrote: > > I'm trying to figure out the cheapest and simplest, Open > Hardware-respecting, way to extend the USB 3/USB C interface on the > BeagleBone AI, internally with a small hub or board. Basically, I need to > attach two SSDs to the USB 3 interface for a RAID 1 mirroring setup. I'm > trying to fit this all into a nice NAS-like enclosure I am currently 3D > printing. > > Of course, I need to also make sure I can use USB C to power the > BeagleBone AI board. > > Any advice would be appreciated. > > I'm currently looking at these as potential solutions, and I will need > these for in bulk/wholesale for an upcoming product: > > https://www.tindie.com/products/mux/usb-30-nanohub/ > > > https://www.tindie.com/products/mux/microhub-the-smallest-usb-hub-with-connectors/ > > > https://www.alibaba.com/product-detail/Type-C-4-port-94v0-pcb_60769581928.html > > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/be1a8e41-b1f1-44bb-ad21-bc34dab77702%40googlegroups.com.
