Hello, Once more...I did receive some advice on this issue w/ the stepper wiring issue I came across. The person told me that the motors might turn in the "wrong" direction after finding out about which two wires are connected to what coil.
... So, if you are an avid user of 3D Printing products or a motor enthusiast, reply, add ideas, or just opine. Seth P.S. I am sure there are more ideas circulating about the Replicape and steppers. On Thursday, November 14, 2019 at 8:27:37 PM UTC-6, Mala Dies wrote: > > Hello, > > I think I already harassed the people at Replicape Slack channel too much > about my singular concerns. Anyway, I am going to reach out here. > > ... > > I have a (many) Kysan 1124090 - 7565 stepper motors. I am turning the > PrintrBot 1403 into a BBB/Replicape build for fun. The fun just crossed me > as an anger issue. > > I will tell you why: > > > - The Kysan steppers (most of their models) have from left to right: > - Blue, Yellow, Green, Red > - I have not found a code to go along w/ these wirings. > > Okay, so... > > I am using the Replicape on my BBB to turn this PrintrBot 3D Printer into > a nice piece of machinery since I want to make the switch. > > ... > > Does anyone know about these Kysan stepper motors and why the wiring on > the motors is B, Y, G, R instead of Code 1 or another code? If so, which is > probably a dated answer, please reply. > > The motors are probably prior to 2011 when they were mfg. and sold. I have > an older machine w/ the original steppers. They work! This is good news! > > But... > > > - For some reason: > - The Replicape keeps making my motors whine and hiss. > - I am not blaming the Replicape or the people who mfg. this Cape > for the BBB. > - I like the Cape and I plan on keeping this Cape configured to my > BBB for use w/ the PrintrBot until completion. > - I plan on making a post about it one day b/c of PrintrBot fans > and BBB fans. I know, fanaticism! > - So: > - If you are reading this message and have some nice input, please > do reply. > - I sure could use some background info. on these motors while > searching online for more info. on them. > > Seth > > P.S. I can control most of the steppers so far but they hiss like they > want to attack. The endstops work too. I have two endstops and one > inductive sensor, a 3D Printer build, and four steppers. > > > > > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/4d16821b-9f24-422c-8df5-8efd99a8e50d%40googlegroups.com.
