Seriously.. are you going to have to be the first 'junk mail' filter rule I'm going to have to implement for e-mails that I receive from the BeagleBoard forum? The volume of e-mails was sensible in the past. What do all the e-mails from you below have to do with the Beaglebone?
________________________________ From: [email protected] <[email protected]> on behalf of Mala Dies <[email protected]> Sent: 18 November 2019 00:45 To: BeagleBoard <[email protected]> Subject: [beagleboard] Re: On All Channels and Flipping Out/Finding Out About Stepper Motors and Wiring from Kysan 1124090 - 7565/Using the Replicape for my BBB Damn it...and I am sorry, I think this is it: To: TMC2100 From: A4982 1. Red (A1) 1. Blue (2B) 2. Green (B1) 2. Yellow (2A) 3. Yellow (A2) 3. Green (1B) 4. Blue (B2) 4. Red (1A) Seth P.S. I am messing up big time. So, everything needed adjusting, wire wise. On Sunday, November 17, 2019 at 6:37:33 PM UTC-6, Mala Dies wrote: Hello, Scratch that... This is the wiring now: To: TMC2100 From: A4982 1. Blue (A1) 1. Blue (2B) 2. Green (B1) 2. Yellow (2A) 3. Yellow (A2) 3. Green (1B) 4. Red (B2) 4. Red (1A) Okay...now we are moving in current times! Seth On Sunday, November 17, 2019 at 6:16:48 PM UTC-6, Mala Dies wrote: Hello Everyone, If anyone is following along, look at these: 1. My wires are listed as: 1. Blue 2. Yellow 3. Green 4. Red 2. I think I can just switch out the Blue and Yellow wiring b/c of these: [TMC2100_Replicape.PNG] and... [A4982_Set_Up_for_Old_Board.PNG] Oh and: [Stepper_MotorY_Wiring_A4982.PNG] Thank you to anyone who participated. I needed support when I knew little. I figured out that b/c of how the drivers are set up, thank you jon_c, the old driver model was faulty in that the expectation for numbered wiring and enables were not needed any longer. ... This is of course due to me, myself, and I. I took the old board apart and tried to plug and play w/ the Replicape which had completely different drivers. Yikes! I know I was goofing up. Seth P.S. Anyway...I think blue goes where yellow went and yellow goes where blue went. The listed photos helped me come to this summary on my way back down to the stone age. I say stone age b/c of things happening that were out of my control, e.g. steppers being held on by stickers and things like that idea made me "stone age" myself back in time. On Saturday, November 16, 2019 at 10:14:48 PM UTC-6, Mala Dies wrote: Hey Sir, Seth here. Look here: https://ultimachine.com/products/kysan-1124090-nema-17-stepper-motor. This is some co. selling these motors but they have a link on that page for the datasheet: [Kysan7565.PNG] Seth P.S. That photo describes the issue or the cure. I will find out soon. Anyway, thank you for not giving up on me and my quest. On Friday, November 15, 2019 at 9:27:16 PM UTC-6, Dennis Bieber wrote: On Fri, 15 Nov 2019 17:41:04 -0800 (PST), in gmane.comp.hardware.beagleboard.user Mala Dies <[email protected]> wrote: >Hey Mr. Dennis, > >I looked around online via google and those sites did not pop up. Besides >that idea, get this! > Google search kysan stepper motor specs second link was https://www.google.com/url?sa=t&rct=j&q=&esrc=s&source=web&cd=4&cad=rja&uact=8&ved=2ahUKEwiV7NSm4-3lAhUBbKwKHRPcD60QFjADegQIAxAB&url=https%3A%2F%2Fultimachine.com%2Fproducts%2Fkysan-1124090-nema-17-stepper-motor&usg=AOvVaw1eKAxf-UJxUoSYRG1m3qU0 which has the link to a data sheet https://cdn.shopify.com/s/files/1/1223/5992/files/Nema17StepperMotor.pdf?6848101445132525963 The other two were found by scrolling the /images/ section of Google looking for candidates with your color scheme, and then opening the related web page for the image. -- Dennis L Bieber -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]<mailto:[email protected]>. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/72c65ed8-ea41-4e22-9ef4-6737077fe4dc%40googlegroups.com<https://groups.google.com/d/msgid/beagleboard/72c65ed8-ea41-4e22-9ef4-6737077fe4dc%40googlegroups.com?utm_medium=email&utm_source=footer>. -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/DB6P18901MB02140AF01E58BBF0CFD6F3BA844D0%40DB6P18901MB0214.EURP189.PROD.OUTLOOK.COM.
