Hello Again, The Replicape people are diverting their attention to, yes to me being a tell-all, some other forms of software for 3D Printing right now. I think this is a fact but I could be wrong.
... Outside of that idea, my motor got tapped and drilled but not in that order. It did not work out. So, you all will no longer hear anymore about that Uncle Billie 3D Printing espionage crud. Otay. Seth P.S. I got a new motor, a stepper in fact, and it does its work on the BBB and the Replicape. Enjoy your life and the people around you. Thank you for the feedback. Signing off for now. See ya! On Monday, November 18, 2019 at 10:44:47 PM UTC-6, Mala Dies wrote: > > Hello, > > Forget all that mess. I got the stepper(s) tested and the coils match up > but the red and green wires for the first coil need to be switched for the > TMC2100 drivers that are on the Replicape. Although, they, the people > behind the Replicape, are leaning on updated boards, one fellow said he > would still support the Replicape. > > ... > > I am guessing that this will only last so long of a period before they get > swamped w/ new customers and have to support only their board and not the > Cape. Who knows, really? > > Seth > > P.S. I do appreciate support at times but all the etiquette lessons need > to stop. I prefer discussions on subjects. I mean this idea holds true; > everything is not up front. Anyway, thank you. > > > > On Monday, November 18, 2019 at 10:16:41 PM UTC-6, Dennis Bieber wrote: >> >> On Mon, 18 Nov 2019 16:38:25 -0800 (PST), in >> gmane.comp.hardware.beagleboard.user Mala Dies >> <[email protected]> wrote: >> >> >> > >> >Anyway...I guess you are right. Those ideas had nothing to do w/ the BBB >> in >> >the short term. I guess I should not share or divulge info. in case >> others >> >are >> >going through the same thing as me. I really do not know how popular the >> >BBB is these days or if the Replicape is popular but I am enjoying >> learning >> >on both. >> > >> >> https://groups.google.com/forum/#!forum/uncle-chucks-3d-printer-stuff >> might be more suited for the hardware side that you've been having >> problems >> with. I don't know -- I don't intend to wrestle with GoogleGroups highly >> unintuitive interface and that group doesn't seem to be duplicated on >> gmane. >> >> > >> >P.S. I will apologize. I, Seth, am sorry for posting exciting >> information >> >for people using the Replicape, BBB, and changing out their 3D Printer >> >controller w/ said hardware. >> > >> >> If it were "exciting information" I doubt there would be a level >> of >> annoyance... But "I tried connecting this way -- it's not working" "I >> changed to these connections -- still not working", etc. gets stale real >> fast (especially when you never trim quoted material, so the same stuff >> gets posted over and over). >> >> "Exciting information" would have been a post of >> -=-=-=- >> I've converted <xyz> 3D printer to use the BBB and Replicape. >> >> This is what I had to do to get it connected... >> >> <write up of what wires had to go where, custom configuration >> files >> created, etc.> >> >> This is a comparison of how the printer behaved before conversion >> and >> after conversion when creating a simple object... >> >> <write up of timings, motor positioning accuracy, whatever is >> significant> >> -=-=-=- >> >> Descriptions of mis-assembled motors is really only significant >> if you >> can show that a majority of these motors were released with the same >> flaw, >> with a description of how to correct that motor. >> >> One post asking for help on confusing wiring is reasonable. >> >> >> Just look at your subject line on the thread... "replicape" and >> "BBB" >> are so far to the right that many classic news clients (I read the group >> via gmane's NNTP server -- and used to post via it until Google started >> rejecting the posts, now I have to remember to "reply by email" and set >> the >> correct Google group name as the "TO" field). For example, in the list of >> messages, what shows up as subjects for me is just >> >> "Re: On All Channels and Flipping Out/Finding O" >> >> which doesn't really provide any thing to encourage one to read the >> thread. >> >> >> FYI: it looks like the Replicape is becoming a defunct product... >> https://www.thing-printer.com/revolve/ includes the processor >> on-board... >> <G> Seeed Studio still has it in stock though. >> -- >> Dennis L Bieber >> >> -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/5992fc55-3dd9-4ea1-8965-16b6e121d395%40googlegroups.com.
