On Mon, Dec 16, 2019 at 2:26 PM ags <[email protected]> wrote: > > More: I tried overriding the dtb in uEnv.txt to force wireless operation > without reflashing eeprom - this was reported to work in some cases. > How can I tell from the version.sh output if my eeprom is corrupt or > incorrect for a BBB Wireless?
>eprom:[A335BNLTBBWG2331?O] >model:[TI_AM335x_BeagleBone_Black] Oh, it's corrupt.. It's coming up as a normal BeagleBone Black.. It should be: eeprom:[A335BNLTBWA51919BBWG0600] model:[TI_AM335x_BeagleBone_Black_Wireless] So when you compare yours with mine, notice how I have the "BWA51919" between A335BNLT and BBWG****, well that's the "Wireless" identifier.. So taking a wire, Ground TP1, (TP1 is between barrel plug and the J1 interface) Then as root run this "one" line command: ***** dd if=/opt/scripts/device/bone/bbgw-eeprom.dump of=/sys/devices/platform/ocp/44e0b000.i2c/i2c-0/0-0050/eeprom ***** ^ Yes this is one line, that gmail/etc will wordwrap into two lines.. Then reboot.. Regards, -- Robert Nelson https://rcn-ee.com/ -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/CAOCHtYgBFgdSBdNDKj_PmqiObmiDfWvibGrK7AtHU%2BY-70XANg%40mail.gmail.com.
