On Mon, 16 Dec 2019 23:54:41 -0800 (PST), in
gmane.comp.hardware.beagleboard.user ags
<[email protected]> wrote:
>The device was purchased in Dec 2018, and just now put into service; it is
>a year (at least) out of date.
Based on the u-boot version -- much further out of date <G>
>I was holding the boot-select button, and it did act as expected, selecting
>between booting from the eMMC (not pushed) and the SD card (pushed) at
>power-up/start.
>It seems that the forced directive in uEnv.txt was ignored, though, so I
>presume that uboot did not read the uEnv.txt from the SD card even if
>booting from it.
>
My point was that, for some time now, my BBBs have not needed the
boot-select. They transition from eMMC to complete the boot using the SD
card, so long as a bootable SD card is in place.
The boot-select seems only required now to force the use of the SD card
u-boot image.
Granted -- none of this appears to have an effect on your WiFi
matter... 'tis just an observation on booting behavior based upon my
collection...
--
Dennis L Bieber
--
For more options, visit http://beagleboard.org/discuss
---
You received this message because you are subscribed to the Google Groups
"BeagleBoard" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
To view this discussion on the web visit
https://groups.google.com/d/msgid/beagleboard/3l1ivel96ql673abto0r6hvbur8ch3jv3i%404ax.com.
