Hi Tarmo, I have tried to use ConnMan to tether the modem dialup connection but it requires ofono which is not well documented, I have also tried to tweak connman settings and I am not getting results. I guess connman tether is restricted to wlan and eth0 network not cellular connection.
On Tue, 17 Dec 2019 at 15:23 Josiah Akinloye <[email protected]> wrote: > Hello Tarmo > > On Tue, 17 Dec 2019 at 15:22 Tarmo Kuuse <[email protected]> wrote: > >> Hi Josiah! >> >> On Monday, 16 December 2019 16:00:20 UTC+2, Josiah Akinloye wrote: >>> >>> Thanks Gwen. >>> I really appreciate your effort. >>> I will get back to you >>> Again... a big thanks >>> >>> On Mon, 16 Dec 2019 at 14:56 Gwen Stouthuysen <[email protected]> >>> wrote: >>> >>>> No, I haven't tried to remove connmanctl >>>> >>>> I have no problem with the application, as it does exactly what I want >>>> it to do. >>>> >>>> There is quite some configuration behind the curtains, dive deeper into >>>> the configuration files and you might find the settings you want to alter. >>>> >>>> Gwen >>>> >>>> Op ma 16 dec. 2019 om 14:17 schreef Josiah Akinloye < >>>> [email protected]>: >>>> >>>>> Thanks Gwen, Do you have any idea how I can manage the WiFi network on >>>>> beagle bone wireless without using CONNMANCTL >>>>> >>>>> Kind regards, >>>>> Josiah >>>>> >>>>> On Mon, 16 Dec 2019 at 13:55 Gwen Stouthuysen <[email protected]> >>>>> wrote: >>>>> >>>>>> Here is some explication/tutorial on bridging the two networks in >>>>>> your BBW >>>>>> >>>>>> https://wiki.debian.org/BridgeNetworkConnections >>>>>> >>>>>> Regards, >>>>>> >>>>>> Gwen >>>>>> >>>>>> Op ma 16 dec. 2019 om 13:49 schreef Josiah Akinloye < >>>>>> [email protected]>: >>>>>> >>>>>>> Thanks for your reply, I have been able to get internet connectivity >>>>>>> from the modem using MBIM and also I have created a WiFi gateway + DHCP >>>>>>> server using COMMANCTL but where I have problem is the bridging the >>>>>>> gateway >>>>>>> with the network port offered by the 4g modem. Thanks again >>>>>>> >>>>>>> On Mon, 16 Dec 2019 at 11:58 Gwen Stouthuysen <[email protected]> >>>>>>> wrote: >>>>>>> >>>>>>>> Let me try to explain what you will have to do: >>>>>>>> >>>>>>>> - Connect the module to the BBBW. >>>>>>>> - It has USB drivers so it should be straight forward to >>>>>>>> enable it as a network node. >>>>>>>> - A small cape could be designed to do this, RPi hats do >>>>>>>> exist >>>>>>>> - >>>>>>>> >>>>>>>> https://www.elementzonline.com/blog/Accessing-internet-with-SIM7600-4G-Modem-using-MBIM-interface-in-Pocketbeagle-Beaglebone >>>>>>>> >>>>>>>> - Set up a WiFi gateway (Wifi access point credentials + >>>>>>>> DHCP server for this port) >>>>>>>> - Bridge the gateway with the network port offered by the >>>>>>>> SIM7600e driver >>>>>>>> - Set up a firewall to avoid malicious access from both WiFi >>>>>>>> and Cellular >>>>>>>> >>>>>>>> It is a bit more complex than forwarding the IP address, but it is >>>>>>>> a well documented setup. >>>>>>>> >>>>>>>> But you are lucky: the standard Debian OS prepares the WiFi as an >>>>>>>> access point, you just have to arrange the SIM7600e integration and the >>>>>>>> bridge & Firewall >>>>>>>> >>>>>>> >> When both your dialup connection and Wifi are managed by connman, you can >> use its built-in tethering functionality to share Internet from first to >> the other. >> >> If I'm interpreting connmanctl v1.36 documentation correctly (connmanctl >> --help), the command would look something like this: >> >> $ sudo connmanctl tether wifi on MY_SSID MY_PASS >> >> There might be some requirements, i.e. connman might assume it has >> established the dialup connection (as opposed to MBIM). I haven't >> experimented this much. >> >> -- >> Kind regards, >> Tarmo >> >> -- >> For more options, visit http://beagleboard.org/discuss >> --- >> You received this message because you are subscribed to the Google Groups >> "BeagleBoard" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to [email protected]. >> To view this discussion on the web visit >> https://groups.google.com/d/msgid/beagleboard/0c404225-528a-4242-b887-a3cf795a7c0d%40googlegroups.com >> <https://groups.google.com/d/msgid/beagleboard/0c404225-528a-4242-b887-a3cf795a7c0d%40googlegroups.com?utm_medium=email&utm_source=footer> >> . >> > -- > > > > > *Josiah Akinloye+2348135010778ceo at Hubtecs Technological > InstituteRobotic and AutomationEgalitarian TranshumanistFuturist"Mindset > powered by hard work equals unbeatable Achievement"--OLUWEST* > -- *Josiah Akinloye+2348062081641profile <https://josiahakinloye.com>-https:josiahakinloye.com <http://josiahakinloye.com>President at Main-Logix LimitedCeo of Savycon TechnologyRobotic and AutomationEgalitarian TranshumanistFuturist"Mindset powered by hard work equals unbeatable Achievement"--Josiah Akinloye* -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/CABXof%3DW-xHPE8qdC76JpkCkhygmLJbtfG7L16eGeXzFv75W7Og%40mail.gmail.com.
