I have been playing around with the BeagleBone Green for a project that I am working on. About 3 days ago, my BBG suddenly lost the ability to connect to the static IP address "192.168.7.2". I simply left the BBG connect to my laptop and went to lunch, and after I came back from lunch the connection stopped working forever.
Since this bug occured, I have been using local network to access the BBG (beaglebone.local), but it is not desirable since I need to plug in wifi or ethernet every time I wish to connect. The other method that worked for me is connect through a FTDI cable, but this is also troublesome because the cable takes up a lot of space. At this point I have two theories why the board is no longer connecting to 192.168.7.2. First, I might have messed up the network/interfaces file when I was trying to set up wifi. There doesn't seem to be anything wrong when I checked this file but I could be wrong. Second, my laptop going to sleep while the BBG was still connected might have messed up something in the board. I would greatly appreciate any opinions/solutions. -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/11d8aa80-36a1-4ec6-99d5-42099c5206ff%40googlegroups.com.
