I'm using the PocketBeagle, and just installed the latest Debian image. Now, my script that sets I/O pins does not work. I have already worked through the name change where, for example, P1_6 is now P1_06, but other config options such as in, out, hi, and low do not work. Nor does config-pin display the status of the pin.
For example: debian@beaglebone:~$ config-pin -q P2_33 Current mode for P2_33 is: gpio debian@beaglebone:~$ config-pin P2_33 lo ERROR: write() to /sys/devices/platform/ocp/ocp:P2_33_pinmux/state failed, No such device Contrary to the error, ocp:P2_33_pinmux/state does exist, but it must not like the value. I find a lot of things that used to work no longer work. What has changed, and what do I do about it? -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/ac03646f-a7e1-48f4-872d-2f4e2adc4470%40googlegroups.com.
