You may need to install the missing arptables and ebtables if they are not already installed:
*sudo apt-get install -y iptables arptables ebtables* Cheers, Jon On Tue, May 12, 2020 at 10:41 PM Rajesh Kulkarni <rajkulkarn...@gmail.com> wrote: > Hi Robert, > I tried the script on my PC Ubunutu host . > All commands went through except for the last two, for which the error > message was something like : > > *update-alternatives: error: alternative /usr/sbin/arptables-legacy for > arptables not registered; not setting* > > *update-alternatives: error: alternative /usr/sbin/ebtables-legacy for > ebtables not registered; not setting* > > And after that when I ran the script on my BBB all I got was : > > *debian@beaglebone:~$ sudo /opt/scripts/network/usb_linux_usb0_ics.sh > * > *SIOCADDRT: File exists > * > *PING 8.8.8.8 (8.8.8.8) 56(84) bytes of data. > * > *From 192.168.7.1 icmp_seq=1 Destination Host Unreachable * > > And the IP was unreachable. Is it something which is trivial and I am > doing wrong ?. > > One more question in the following command : > > sudo iptables --table nat --append POSTROUTING --out-interface eth0 -j > MASQUERADE > sudo iptables --append FORWARD --in-interface eth1 -j ACCEPT > > I would want to use my wifi id instead of eth0 if I want the internet to go > through PC Host wifi , right ?And my eth0 is 192.168.7.1 & eth1 is > 192.168.6.1. Is it encouraged to use eth1 for BBB on Linux instead of > 192.168.7.1 ? > > > > On Tuesday, May 12, 2020 at 9:09:53 PM UTC-7, RobertCNelson wrote: >> >> >> >> On Tue, May 12, 2020, 10:58 PM Rajesh Kulkarni <rajkul...@gmail.com> >> wrote: >> >>> I have installed the latest debian image on my BBB. And I don't know how >>> to proceed with getting the internet to work via USB . >>> >>> Does making the following changes in /etc/default/bb-boot get you a >>> internet connection ? (I mean via Wifi as a gateway BBB via >>> USB<-->UBUNTU<-> Wifi ) >>> >> >> >> Just use iptables on your Ubuntu host: >> >> >> https://github.com/RobertCNelson/boot-scripts/blob/master/network/doc-debian-setup.md >> >> And run this script on the beagle >> >> sudo /opt/scripts/network/usb_linux_usb0_ics.sh >> >> >> Regards, >> > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to the Google Groups > "BeagleBoard" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to beagleboard+unsubscr...@googlegroups.com. > To view this discussion on the web visit > https://groups.google.com/d/msgid/beagleboard/68dfb039-f96d-4a87-b1db-d107c8dd5939%40googlegroups.com > <https://groups.google.com/d/msgid/beagleboard/68dfb039-f96d-4a87-b1db-d107c8dd5939%40googlegroups.com?utm_medium=email&utm_source=footer> > . > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/CAG99bkp4LxYPBWQH%3DYg_ixWt-K7wR2VGtekjtqb-YBxEz_d4fA%40mail.gmail.com.
