Ken
Thank you so much ! It looks it helped.I was able to successfully ping dns
server names with no issues !
* So I copied the postboot.sh as you suggested.
* did "sudo crontab -e"
* Added the following in the file" @reboot sh
/home/debian/cronjobs/postboot.sh 1>/home/debian/cronjobs/log
2>/home/debian/cronjobs/log "
* Did a reboot.
* The following is the log file :
=== Boot ===
Set Nameserver and Gateway
Nameserver 8.8.8.8, GW 192.168.7.1
Set route with gw 192.168.7.1
Display route
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use
Iface
default 192.168.7.1 0.0.0.0 UG 0 0 0 usb0
192.168.6.0 0.0.0.0 255.255.255.0 U 0 0 0 usb1
192.168.7.0 0.0.0.0 255.255.255.0 U 0 0 0 usb0
Set timezone
Local time: Mon 2020-05-18 18:44:27 PDT
Universal time: Tue 2020-05-19 01:44:27 UTC
RTC time: Tue 2020-05-19 01:44:27
Time zone: America/Los_Angeles (PDT, -0700)
System clock synchronized: no
NTP service: active
RTC in local TZ: no
Finished at Mon 18 May 2020 06:44:27 PM PDT
On Mon, May 18, 2020 at 7:08 AM Kenneth Martin <[email protected]>
wrote:
> Rajesh Kulkarni
> A lot has changed with the 4-6 release. Don't fool around with
> /etc/network/interfaces or /etc/resolv.conf.
>
> As debian user in the home directory. cd ~/
>
> mkdir cronjobs
>
> copy the attached file into cronjobs
>
> cd cronjobs
>
> Read the top of the file postboot.sh
>
> The following must be done as sudo because the user level will not have
> permission.
> .
> sudo crontab -e
>
> Make entry as explained in postboot.sh
>
> This entry will execute at boot time and sleep 20 seconds to allow the
> system to be up.
>
> This may seem complicated. The reason for this setup is you can later if
> needed make other cronjobs
> as you or as sudo. Remember full pathnames and any executed commands
> requiring sudo access
> will need to be added as sudo crontab -e. If you want a user level
> cronjob just do crontab -e
>
> When this script runs at boot time it will create a file called log. You
> can cat log to see the results of
> the current boot. postboot.sh also updates the system date/time. Please
> nano or vi postboot.sh and
> verify your Country / Time Zone.
>
> So, backup original cp /etc/network/interfaces ~/. Then clean up using
> sudo nano /etc/network/interfaces
> The only two active entries should be:
>
> auto lo
> iface lo inet loopback
>
> Reboot sudo reboot then cat log in cronjobs
>
> Let me know how it works out.
>
> Ken
>
> On Mon, May 18, 2020 at 2:01 AM Rajesh Kulkarni <[email protected]>
> wrote:
>
>> Hi Kenneth,
>> I am using Debian Buster IoT Image 2020-04-06 .
>>
>> Regards,
>> Rajesh
>>
>> On Sun, May 17, 2020 at 7:59 PM Kenneth Martin <[email protected]>
>> wrote:
>>
>>> Rajesh Kulkarni
>>> Send another message tomorrow. I have a fix for that and it uses crontab
>>> as sudo. I
>>> will send you examples of it all and it works. I use it.
>>>
>>> What version of Debian are you running? cat /etc/dogtag
>>>
>>>
>>> On Sun, May 17, 2020 at 9:21 PM Rajesh Kulkarni <[email protected]>
>>> wrote:
>>>
>>>> So I added in my /etc/network/interfaces
>>>>
>>>> iface usb0 inet static
>>>> address 192.168.7.2
>>>> netmask 255.255.255.0
>>>> network 192.168.7.0
>>>> nameservers 8.8.8.8
>>>> gateway 192.168.7.1
>>>>
>>>> This *takes care of ping 8.8.8.8*. after a reboot
>>>>
>>>> But
>>>> still unable to ping www.google.com : *Temporary failure in name
>>>> resolution*
>>>>
>>>>
>>>> On Sun, May 17, 2020 at 5:30 PM Rajesh Kulkarni <
>>>> [email protected]> wrote:
>>>>
>>>>> I was finally able to connect to the internet via USB(still dont know
>>>>> what the problem was, I just reinstalled my Host Ubuntu)
>>>>>
>>>>> I followed the instructions given by Robert and ran the script on my
>>>>> Host PC
>>>>> https://github.com/RobertCNelson/boot-scripts/blob/master/network/doc-debian-setup.md
>>>>> .
>>>>> And this on the BBB " sudo /opt/scripts/network/usb_linux_usb0_ics.sh "
>>>>>
>>>>> *But ,the above instructions apparently doesn't save the configuration*
>>>>> , and the default gateway disappears after the BBB is rebooted.
>>>>> So I have to execute this command sudo
>>>>> /opt/scripts/network/usb_linux_usb0_ics.sh every reboot.
>>>>>
>>>>> Do I still need to save the config in /etc/network/interfaces
>>>>> something like :
>>>>> iface usb0 inet static
>>>>> address 192.168.7.2
>>>>> netmask 255.255.0.0
>>>>> network 192.168.7.0
>>>>> gateway 192.168.7.1
>>>>>
>>>>> OR
>>>>> does it have to be through a bash script which runs has to be set to
>>>>> autorun mode after boot ?
>>>>>
>>>>> Thanks
>>>>> Rajesh
>>>>>
>>>>> On Sat, May 16, 2020 at 2:02 PM jonnymo <[email protected]> wrote:
>>>>>
>>>>>> Okay, I solved my issue by adding an iptable entry for the
>>>>>> return from wlan0 to eth1 (BB).
>>>>>>
>>>>>> * sudo iptables -A FORWARD -i wlan0 -o eth1 -j ACCEPT*
>>>>>>
>>>>>>
>>>>>> Now pinging '8.8.8.8' from the BB works as expected.
>>>>>>
>>>>>> *root@beaglebone:~# ping -I usb0 8.8.8.8*
>>>>>> *PING 8.8.8.8 (8.8.8.8) from 192.168.7.2 usb0: 56(84) bytes of data.*
>>>>>> *64 bytes from 8.8.8.8 <http://8.8.8.8>: icmp_seq=1 ttl=103 time=17.9
>>>>>> ms*
>>>>>> *64 bytes from 8.8.8.8 <http://8.8.8.8>: icmp_seq=2 ttl=103 time=15.8
>>>>>> ms*
>>>>>> *64 bytes from 8.8.8.8 <http://8.8.8.8>: icmp_seq=3 ttl=103 time=15.3
>>>>>> ms*
>>>>>> *64 bytes from 8.8.8.8 <http://8.8.8.8>: icmp_seq=4 ttl=103 time=15.7
>>>>>> m*
>>>>>>
>>>>>>
>>>>>> Cheers,
>>>>>>
>>>>>> Jon
>>>>>>
>>>>>> On Sat, May 16, 2020 at 12:29 PM Robert Heller <[email protected]>
>>>>>> wrote:
>>>>>>
>>>>>>> At Sat, 16 May 2020 13:32:03 -0400 [email protected]
>>>>>>> wrote:
>>>>>>>
>>>>>>> >
>>>>>>> > Jon,
>>>>>>> >
>>>>>>> > So you can ssh from the PC to the BB and ssh to the PC from the
>>>>>>> BB...
>>>>>>> >
>>>>>>> > So the two are talking. Hum.
>>>>>>> >
>>>>>>> > Have you checked the firewall on the PC side to make sure it is
>>>>>>> allowing
>>>>>>> > traffic from 192.168.7 out?
>>>>>>>
>>>>>>> And is it set to forward IP packets? You might need to have the PC
>>>>>>> implement
>>>>>>> NAT and/or Masquading. And yes, check the firewall.
>>>>>>>
>>>>>>> >
>>>>>>> >
>>>>>>> > On Sat, May 16, 2020 at 12:53 PM jonnymo <[email protected]>
>>>>>>> wrote:
>>>>>>> >
>>>>>>> > > I can ssh between the PC and the BB via 192.168.7.x and back
>>>>>>> without
>>>>>>> > > issue.
>>>>>>> > > However, no traffic is sent out passed the wireless connection.
>>>>>>> > >
>>>>>>> > > Jon
>>>>>>> > >
>>>>>>> > >
>>>>>>> > > On Sat, May 16, 2020 at 9:44 AM Kenneth Martin <
>>>>>>> [email protected]>
>>>>>>> > > wrote:
>>>>>>> > >
>>>>>>> > >>
>>>>>>> > >> *On the Beaglebone can you ping* * 192.168.7.1 ?*
>>>>>>> > >>
>>>>>>> > >> *On my Beaglebone here is what I get*
>>>>>>> > >>
>>>>>>> > >>
>>>>>>> > >>
>>>>>>> > >>
>>>>>>> > >>
>>>>>>> > >>
>>>>>>> > >>
>>>>>>> > >> *debian@beaglebone:~$ netstat -rnKernel IP routing
>>>>>>> tableDestination
>>>>>>> > >> Gateway Genmask Flags MSS Window irtt
>>>>>>> Iface0.0.0.0
>>>>>>> > >> 192.168.7.1 0.0.0.0 UG 0 0 0
>>>>>>> > >> usb0192.168.6.0 0.0.0.0 255.255.255.0 U
>>>>>>> 0 0
>>>>>>> > >> 0 usb1192.168.147.0 0.0.0.0 255.255.255.0 U
>>>>>>> 0 0
>>>>>>> > >> 0 usb0*
>>>>>>> > >>
>>>>>>> > >> *Looking at your setup I would say the ping will fail*
>>>>>>> > >>
>>>>>>> > >> *$ sudo netstat -rn*
>>>>>>> > >> *Kernel IP routing table*
>>>>>>> > >> *Destination Gateway Genmask Flags MSS
>>>>>>> Window irtt
>>>>>>> > >> Iface*
>>>>>>> > >> *0.0.0.0 192.168.2.1 0.0.0.0 UG 0 0
>>>>>>> 0
>>>>>>> > >> wlan0*
>>>>>>> > >> *169.254.0.0 0.0.0.0 255.255.0.0 U 0 0
>>>>>>> 0
>>>>>>> > >> wlan0*
>>>>>>> > >> *172.17.0.0 0.0.0.0 255.255.0.0 U 0 0
>>>>>>> 0
>>>>>>> > >> docker0*
>>>>>>> > >> *192.168.2.0 0.0.0.0 255.255.255.0 U 0 0
>>>>>>> 0
>>>>>>> > >> wlan0*
>>>>>>> > >> *192.168.6.0 0.0.0.0 255.255.255.0 U 0 0
>>>>>>> 0
>>>>>>> > >> usb0*
>>>>>>> > >> *192.168.7.0 0.0.0.0 255.255.255.0 U 0 0
>>>>>>> 0
>>>>>>> > >> eth1*
>>>>>>> > >>
>>>>>>> > >>
>>>>>>> > >> *Unfortunately my only Linux hosts are on VM's.*
>>>>>>> > >>
>>>>>>> > >> On Sat, May 16, 2020 at 12:11 PM jonnymo <[email protected]>
>>>>>>> wrote:
>>>>>>> > >>
>>>>>>> > >>> I'm seeing a similar issue with a BBAI.
>>>>>>> > >>> However, on my host Ubuntu 18 system, I am seeing the network
>>>>>>> ports from
>>>>>>> > >>> the BB in the routing table.
>>>>>>> > >>>
>>>>>>> > >>> *$ sudo netstat -rn*
>>>>>>> > >>> *Kernel IP routing table*
>>>>>>> > >>> *Destination Gateway Genmask Flags MSS
>>>>>>> Window
>>>>>>> > >>> irtt Iface*
>>>>>>> > >>> *0.0.0.0 192.168.2.1 0.0.0.0 UG 0 0
>>>>>>> > >>> 0 wlan0*
>>>>>>> > >>> *169.254.0.0 0.0.0.0 255.255.0.0 U 0 0
>>>>>>> > >>> 0 wlan0*
>>>>>>> > >>> *172.17.0.0 0.0.0.0 255.255.0.0 U 0 0
>>>>>>> > >>> 0 docker0*
>>>>>>> > >>> *192.168.2.0 0.0.0.0 255.255.255.0 U 0 0
>>>>>>> > >>> 0 wlan0*
>>>>>>> > >>> *192.168.6.0 0.0.0.0 255.255.255.0 U 0 0
>>>>>>> > >>> 0 usb0*
>>>>>>> > >>> *192.168.7.0 0.0.0.0 255.255.255.0 U 0 0
>>>>>>> > >>> 0 eth1*
>>>>>>> > >>>
>>>>>>> > >>>
>>>>>>> > >>> On the BB:
>>>>>>> > >>> * # netstat -rn*
>>>>>>> > >>>
>>>>>>> > >>>
>>>>>>> > >>>
>>>>>>> > >>>
>>>>>>> > >>>
>>>>>>> > >>>
>>>>>>> > >>>
>>>>>>> > >>> *Kernel IP routing tableDestination Gateway Genmask
>>>>>>> > >>> Flags MSS Window irtt Iface0.0.0.0 192.168.7.1
>>>>>>> 0.0.0.0
>>>>>>> > >>> UG 0 0 0 usb0192.168.6.0 0.0.0.0
>>>>>>> > >>> 255.255.255.0 U 0 0 0 usb1192.168.7.0
>>>>>>> 0.0.0.0
>>>>>>> > >>> 255.255.255.0 U 0 0 0 usb0192.168.8.0
>>>>>>> 0.0.0.0
>>>>>>> > >>> 255.255.255.0 U 0 0 0 SoftAp0*
>>>>>>> > >>>
>>>>>>> > >>> Running tcpdump on my Ubuntu system, I can see where the
>>>>>>> incoming
>>>>>>> > >>> traffic from the BB is reaching the correct IP on the host but
>>>>>>> does not
>>>>>>> > >>> seem to be getting routed out.
>>>>>>> > >>>
>>>>>>> > >>> On BB:
>>>>>>> > >>>
>>>>>>> > >>> *# ping -I usb0 8.8.8.8*
>>>>>>> > >>>
>>>>>>> > >>> On Host:
>>>>>>> > >>>
>>>>>>> > >>> *$ sudo tcpdump -nvvi wlan0 'icmp[icmptype] == icmp-echo or
>>>>>>> > >>> icmp[icmptype] == icmp-echoreply'*
>>>>>>> > >>> *tcpdump: listening on wlan0, link-type EN10MB (Ethernet),
>>>>>>> capture size
>>>>>>> > >>> 262144 bytes*
>>>>>>> > >>> *08:55:34.027628 IP (tos 0x0, ttl 115, id 44071, offset 0,
>>>>>>> flags [DF],
>>>>>>> > >>> proto ICMP (1), length 84)*
>>>>>>> > >>> * 192.168.2.216 > 8.8.8.8 <http://8.8.8.8>: ICMP echo
>>>>>>> request, id
>>>>>>> > >>> 1402, seq 1, length 64*
>>>>>>> > >>> *08:55:34.049037 IP (tos 0x20, ttl 52, id 0, offset 0, flags
>>>>>>> [none],
>>>>>>> > >>> proto ICMP (1), length 84)*
>>>>>>> > >>> * 8.8.8.8 > 192.168.2.216 <http://192.168.2.216>: ICMP
>>>>>>> echo reply, id
>>>>>>> > >>> 1402, seq 1, length 64*
>>>>>>> > >>> *08:55:35.049654 IP (tos 0x0, ttl 115, id 44297, offset 0,
>>>>>>> flags [DF],
>>>>>>> > >>> proto ICMP (1), length 84)*
>>>>>>> > >>> * 192.168.2.216 > 8.8.8.8 <http://8.8.8.8>: ICMP echo
>>>>>>> request, id
>>>>>>> > >>> 1402, seq 2, length 64*
>>>>>>> > >>> *08:55:35.067301 IP (tos 0x20, ttl 52, id 0, offset 0, flags
>>>>>>> [none],
>>>>>>> > >>> proto ICMP (1), length 84)*
>>>>>>> > >>>
>>>>>>> > >>> It seems that something either on the Ubuntu side or in the
>>>>>>> network is
>>>>>>> > >>> blocking the traffic.
>>>>>>> > >>>
>>>>>>> > >>> Cheers,
>>>>>>> > >>>
>>>>>>> > >>> Jon
>>>>>>> > >>>
>>>>>>> > >>> On Sat, May 16, 2020 at 7:07 AM KenUnix <
>>>>>>> [email protected]> wrote:
>>>>>>> > >>>
>>>>>>> > >>>>
>>>>>>> > >>>> I too am having problems today. In your regard
>>>>>>> > >>>>
>>>>>>> > >>>> The following is my netstat -rn for my Ubuntu Linux host PC:
>>>>>>> > >>>>
>>>>>>> > >>>> Kernel IP routing table
>>>>>>> > >>>> |||---
>>>>>>> > >>>> Destination Gateway Genmask Flags MSS
>>>>>>> Window
>>>>>>> > >>>> irtt Iface
>>>>>>> > >>>> 0.0.0.0 192.168.1.1 0.0.0.0 UG 0 0
>>>>>>> > >>>> 0 wlp8s0
>>>>>>> > >>>> 10.42.0.0 0.0.0.0 255.255.255.0 U 0 0
>>>>>>> > >>>> 0 eth0
>>>>>>> > >>>> 10.42.1.0 0.0.0.0 255.255.255.0 U 0 0
>>>>>>> > >>>> 0 eth1
>>>>>>> > >>>> 169.254.0.0 0.0.0.0 255.255.0.0 U 0 0
>>>>>>> > >>>> 0 eth0
>>>>>>> > >>>> 192.168.1.0 0.0.0.0 255.255.255.0 U 0 0
>>>>>>> > >>>> 0 wlp8s0 (wlp8s0 is my wifi)
>>>>>>> > >>>>
>>>>>>> > >>>> And my BBB routing table looks like
>>>>>>> > >>>> |||---
>>>>>>> > >>>> Destination Gateway Genmask Flags MSS
>>>>>>> Window
>>>>>>> > >>>> irtt Iface
>>>>>>> > >>>> 0.0.0.0 192.168.7.1 0.0.0.0 UG 0 0
>>>>>>> > >>>> 0 usb0
>>>>>>> > >>>> 192.168.6.0 0.0.0.0 255.255.255.0 U 0 0
>>>>>>> > >>>> 0 usb1
>>>>>>> > >>>> 192.168.7.0 0.0.0.0 255.255.255.0 U 0 0
>>>>>>> > >>>> 0 usb0
>>>>>>> > >>>>
>>>>>>> > >>>> The gateway address on BOTH sides of the connection should
>>>>>>> match
>>>>>>> > >>>> with one side being .....1 and the other side being ....2 If
>>>>>>> they do
>>>>>>> > >>>> not
>>>>>>> > >>>> line up each side will not see the other side.
>>>>>>> > >>>>
>>>>>>> > >>>> --
>>>>>>> > >>>> For more options, visit http://beagleboard.org/discuss
>>>>>>> > >>>> ---
>>>>>>> > >>>> You received this message because you are subscribed to the
>>>>>>> Google
>>>>>>> > >>>> Groups "BeagleBoard" group.
>>>>>>> > >>>> To unsubscribe from this group and stop receiving emails from
>>>>>>> it, send
>>>>>>> > >>>> an email to [email protected].
>>>>>>> > >>>> To view this discussion on the web visit
>>>>>>> > >>>>
>>>>>>> https://groups.google.com/d/msgid/beagleboard/21cc8527-1fd9-4f9f-bd7d-7d6f46f25f58%40googlegroups.com
>>>>>>> > >>>> <
>>>>>>> https://groups.google.com/d/msgid/beagleboard/21cc8527-1fd9-4f9f-bd7d-7d6f46f25f58%40googlegroups.com?utm_medium=email&utm_source=footer
>>>>>>> >
>>>>>>> > >>>> .
>>>>>>> > >>>>
>>>>>>> > >>> --
>>>>>>> > >>> For more options, visit http://beagleboard.org/discuss
>>>>>>> > >>> ---
>>>>>>> > >>> You received this message because you are subscribed to a
>>>>>>> topic in the
>>>>>>> > >>> Google Groups "BeagleBoard" group.
>>>>>>> > >>> To unsubscribe from this topic, visit
>>>>>>> > >>>
>>>>>>> https://groups.google.com/d/topic/beagleboard/QBTe4BoyF1c/unsubscribe
>>>>>>> .
>>>>>>> > >>> To unsubscribe from this group and all its topics, send an
>>>>>>> email to
>>>>>>> > >>> [email protected].
>>>>>>> > >>> To view this discussion on the web visit
>>>>>>> > >>>
>>>>>>> https://groups.google.com/d/msgid/beagleboard/CAG99bkr7RGpa_wmvtjbw1JFkHe381xE%3Dn9-pJ0EmuD4W2itMDQ%40mail.gmail.com
>>>>>>> > >>> <
>>>>>>> https://groups.google.com/d/msgid/beagleboard/CAG99bkr7RGpa_wmvtjbw1JFkHe381xE%3Dn9-pJ0EmuD4W2itMDQ%40mail.gmail.com?utm_medium=email&utm_source=footer
>>>>>>> >
>>>>>>> > >>> .
>>>>>>> > >>>
>>>>>>> > >> --
>>>>>>> > >> For more options, visit http://beagleboard.org/discuss
>>>>>>> > >> ---
>>>>>>> > >> You received this message because you are subscribed to the
>>>>>>> Google Groups
>>>>>>> > >> "BeagleBoard" group.
>>>>>>> > >> To unsubscribe from this group and stop receiving emails from
>>>>>>> it, send an
>>>>>>> > >> email to [email protected].
>>>>>>> > >> To view this discussion on the web visit
>>>>>>> > >>
>>>>>>> https://groups.google.com/d/msgid/beagleboard/CAJXSPs83vAiDHARKiEQ-i-UhvL7Rx3odCLf4BYjUzP5tA1pmAw%40mail.gmail.com
>>>>>>> > >> <
>>>>>>> https://groups.google.com/d/msgid/beagleboard/CAJXSPs83vAiDHARKiEQ-i-UhvL7Rx3odCLf4BYjUzP5tA1pmAw%40mail.gmail.com?utm_medium=email&utm_source=footer
>>>>>>> >
>>>>>>> > >> .
>>>>>>> > >>
>>>>>>> > > --
>>>>>>> > > For more options, visit http://beagleboard.org/discuss
>>>>>>> > > ---
>>>>>>> > > You received this message because you are subscribed to a topic
>>>>>>> in the
>>>>>>> > > Google Groups "BeagleBoard" group.
>>>>>>> > > To unsubscribe from this topic, visit
>>>>>>> > >
>>>>>>> https://groups.google.com/d/topic/beagleboard/QBTe4BoyF1c/unsubscribe
>>>>>>> .
>>>>>>> > > To unsubscribe from this group and all its topics, send an email
>>>>>>> to
>>>>>>> > > [email protected].
>>>>>>> > > To view this discussion on the web visit
>>>>>>> > >
>>>>>>> https://groups.google.com/d/msgid/beagleboard/CAG99bkoJwoGQjpHGdybUojycZpAyNifKP3HHwgdZq4UNFfMJ1w%40mail.gmail.com
>>>>>>> > > <
>>>>>>> https://groups.google.com/d/msgid/beagleboard/CAG99bkoJwoGQjpHGdybUojycZpAyNifKP3HHwgdZq4UNFfMJ1w%40mail.gmail.com?utm_medium=email&utm_source=footer
>>>>>>> >
>>>>>>> > > .
>>>>>>> > >
>>>>>>> >
>>>>>>>
>>>>>>> --
>>>>>>> Robert Heller -- 978-544-6933 Cell: 413-658-7953 GV:
>>>>>>> 978-633-5364
>>>>>>> Deepwoods Software -- Custom Software Services
>>>>>>> http://www.deepsoft.com/ -- Linux Administration Services
>>>>>>> [email protected] -- Webhosting Services
>>>>>>>
>>>>>>>
>>>>>>> --
>>>>>>> For more options, visit http://beagleboard.org/discuss
>>>>>>> ---
>>>>>>> You received this message because you are subscribed to the Google
>>>>>>> Groups "BeagleBoard" group.
>>>>>>> To unsubscribe from this group and stop receiving emails from it,
>>>>>>> send an email to [email protected].
>>>>>>> To view this discussion on the web visit
>>>>>>> https://groups.google.com/d/msgid/beagleboard/20200516192904.5AE44223E69%40sharky4.deepsoft.com
>>>>>>> .
>>>>>>>
>>>>>> --
>>>>>> For more options, visit http://beagleboard.org/discuss
>>>>>> ---
>>>>>> You received this message because you are subscribed to the Google
>>>>>> Groups "BeagleBoard" group.
>>>>>> To unsubscribe from this group and stop receiving emails from it,
>>>>>> send an email to [email protected].
>>>>>> To view this discussion on the web visit
>>>>>> https://groups.google.com/d/msgid/beagleboard/CAG99bkqk0pq63Bud1ave3D5u15cmPmXaaPvn9pC8Mj-HRHAaLA%40mail.gmail.com
>>>>>> <https://groups.google.com/d/msgid/beagleboard/CAG99bkqk0pq63Bud1ave3D5u15cmPmXaaPvn9pC8Mj-HRHAaLA%40mail.gmail.com?utm_medium=email&utm_source=footer>
>>>>>> .
>>>>>>
>>>>> --
>>>> For more options, visit http://beagleboard.org/discuss
>>>> ---
>>>> You received this message because you are subscribed to a topic in the
>>>> Google Groups "BeagleBoard" group.
>>>> To unsubscribe from this topic, visit
>>>> https://groups.google.com/d/topic/beagleboard/QBTe4BoyF1c/unsubscribe.
>>>> To unsubscribe from this group and all its topics, send an email to
>>>> [email protected].
>>>> To view this discussion on the web visit
>>>> https://groups.google.com/d/msgid/beagleboard/CAFZwMKJ%3DqAGFrxssxs9QxWu-dqQ%2BK9FagDDiQhWvvo3LvVm5OQ%40mail.gmail.com
>>>> <https://groups.google.com/d/msgid/beagleboard/CAFZwMKJ%3DqAGFrxssxs9QxWu-dqQ%2BK9FagDDiQhWvvo3LvVm5OQ%40mail.gmail.com?utm_medium=email&utm_source=footer>
>>>> .
>>>>
>>> --
>>> For more options, visit http://beagleboard.org/discuss
>>> ---
>>> You received this message because you are subscribed to the Google
>>> Groups "BeagleBoard" group.
>>> To unsubscribe from this group and stop receiving emails from it, send
>>> an email to [email protected].
>>> To view this discussion on the web visit
>>> https://groups.google.com/d/msgid/beagleboard/CAJXSPs8_1Xsg4rNjBiJ8zQFa3ipNrU2y5i9yuwBLq3db_9RMNA%40mail.gmail.com
>>> <https://groups.google.com/d/msgid/beagleboard/CAJXSPs8_1Xsg4rNjBiJ8zQFa3ipNrU2y5i9yuwBLq3db_9RMNA%40mail.gmail.com?utm_medium=email&utm_source=footer>
>>> .
>>>
>> --
>> For more options, visit http://beagleboard.org/discuss
>> ---
>> You received this message because you are subscribed to a topic in the
>> Google Groups "BeagleBoard" group.
>> To unsubscribe from this topic, visit
>> https://groups.google.com/d/topic/beagleboard/QBTe4BoyF1c/unsubscribe.
>> To unsubscribe from this group and all its topics, send an email to
>> [email protected].
>> To view this discussion on the web visit
>> https://groups.google.com/d/msgid/beagleboard/CAFZwMKK5K2EyUQa8CynrzmOLUVkkrmV6H8EzmWzigfGbb-8_XA%40mail.gmail.com
>> <https://groups.google.com/d/msgid/beagleboard/CAFZwMKK5K2EyUQa8CynrzmOLUVkkrmV6H8EzmWzigfGbb-8_XA%40mail.gmail.com?utm_medium=email&utm_source=footer>
>> .
>>
> --
> For more options, visit http://beagleboard.org/discuss
> ---
> You received this message because you are subscribed to the Google Groups
> "BeagleBoard" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to [email protected].
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/beagleboard/CAJXSPs8nLrfCthjdmWErQg%3DUrufjG_WZfWEtMC%2B90tcWxO34yA%40mail.gmail.com
> <https://groups.google.com/d/msgid/beagleboard/CAJXSPs8nLrfCthjdmWErQg%3DUrufjG_WZfWEtMC%2B90tcWxO34yA%40mail.gmail.com?utm_medium=email&utm_source=footer>
> .
>
--
For more options, visit http://beagleboard.org/discuss
---
You received this message because you are subscribed to the Google Groups
"BeagleBoard" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
To view this discussion on the web visit
https://groups.google.com/d/msgid/beagleboard/CAFZwMK%2B2VgTm%3DG3VZFd0%3DD1Hv7k%2BwF99n7fcdL_OgJgGS3iUtw%40mail.gmail.com.
