Hi, I've just downloaded and instaled console version of Debian microSD (5.4.38-ti-rt-r8) on my BBB: bone-debian-10.4-console-armhf-2020-05-18-1gb.img.xz Unfortunately during setting wifi I stuck: connmanctl> enable wifi Error wifi: Method "SetProperty" with signature "sv" on interface "net.connman.Technology" doesn't exist
My system: debian@beaglebone:~$ sudo /opt/scripts/tools/version.sh eeprom:[A335BNLT00C05214BBBK099E] model:[TI_AM335x_BeagleBone_Black] dogtag:[BeagleBoard.org Debian Buster Console Image 2020-05-18] bootloader:[microSD-(push-button)]:[/dev/mmcblk0]:[U-Boot 2019.04-00002-g31a8ae0206]:[location: dd MBR] bootloader:[eMMC-(default)]:[/dev/mmcblk1]:[U-Boot 2019.04-00002-g07d5700e21]:[location: dd MBR] UBOOT: Booted Device-Tree:[am335x-boneblack-uboot-univ.dts] UBOOT: Loaded Overlay:[AM335X-PRU-RPROC-4-19-TI-00A0] UBOOT: Loaded Overlay:[BB-ADC-00A0] UBOOT: Loaded Overlay:[BB-BONE-eMMC1-01-00A0] UBOOT: Loaded Overlay:[BB-HDMI-TDA998x-00A0] kernel:[5.4.38-ti-r8] /boot/uEnv.txt Settings: uboot_overlay_options:[enable_uboot_overlays=1] uboot_overlay_options:[uboot_overlay_pru=/lib/firmware/AM335X-PRU-RPROC-4-19-TI-00A0.dtbo] uboot_overlay_options:[enable_uboot_cape_universal=1] pkg check: to individually upgrade run: [sudo apt install --only-upgrade <pkg>] pkg:[bb-cape-overlays]:[4.14.20200430.0-0~buster+20200430] pkg:[bb-wl18xx-firmware]:[1.20200420.1-0~buster+20200424] pkg:[kmod]:[26-1] WARNING:pkg:[librobotcontrol]:[NOT_INSTALLED] pkg:[firmware-ti-connectivity]:[20190717-2rcnee1~buster+20200305] groups:[debian : debian adm kmem dialout cdrom floppy audio dip video plugdev users systemd-journal input bluetooth netdev gpio pwm eqep remoteproc admin spi iio i2c docker tisdk weston-launch xenomai cloud9ide] cmdline:[console=ttyO0,115200n8 bone_capemgr.uboot_capemgr_enabled=1 root=/dev/mmcblk0p1 ro rootfstype=ext4 rootwait coherent_pool=1M net.ifnames=0 lpj=1990656 rng_core.default_quality=100 quiet] dmesg | grep remote [ 2.429955] remoteproc remoteproc0: wkup_m3 is available [ 2.786315] remoteproc remoteproc1: 4a334000.pru is available [ 2.788185] remoteproc remoteproc2: 4a338000.pru is available [ 2.792474] remoteproc remoteproc0: powering up wkup_m3 [ 2.792621] remoteproc remoteproc0: Booting fw image am335x-pm-firmware.elf, size 217168 [ 2.796630] remoteproc remoteproc0: remote processor wkup_m3 is now up dmesg | grep pru [ 2.786315] remoteproc remoteproc1: 4a334000.pru is available [ 2.786480] pru-rproc 4a334000.pru: PRU rproc node /ocp/interconnect@4a000000/segment@0/target-module@300000/pruss@0/pru@34000 probed successfully [ 2.788185] remoteproc remoteproc2: 4a338000.pru is available [ 2.788359] pru-rproc 4a338000.pru: PRU rproc node /ocp/interconnect@4a000000/segment@0/target-module@300000/pruss@0/pru@38000 probed successfully dmesg | grep pinctrl-single [ 1.737115] pinctrl-single 44e10800.pinmux: 142 pins, size 568 dmesg | grep gpio-of-helper [ 1.751795] gpio-of-helper ocp:cape-universal: ready END What Can I do to move on? Regards, B -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/57f22a42-ad76-437c-aba4-835d274e1b8c%40googlegroups.com.
