On Sat, May 30, 2020 at 10:53 AM <[email protected]> wrote:
>
> Hi,
> I've just downloaded and instaled console version of Debian microSD 
> (5.4.38-ti-rt-r8) on my BBB:
> bone-debian-10.4-console-armhf-2020-05-18-1gb.img.xz
> Unfortunately during setting wifi I stuck:
> connmanctl> enable wifi
> Error wifi: Method "SetProperty" with signature "sv" on interface 
> "net.connman.Technology" doesn't exist

Which WiFi adapter are you using?

The version.sh scripts reports a normal BeagleBone Black (non-WiFi)
with no USB WiFi adapter present..

Regards,

>
> My system:
> debian@beaglebone:~$ sudo /opt/scripts/tools/version.sh
> eeprom:[A335BNLT00C05214BBBK099E]
> model:[TI_AM335x_BeagleBone_Black]
> dogtag:[BeagleBoard.org Debian Buster Console Image 2020-05-18]
> bootloader:[microSD-(push-button)]:[/dev/mmcblk0]:[U-Boot 
> 2019.04-00002-g31a8ae0206]:[location: dd MBR]
> bootloader:[eMMC-(default)]:[/dev/mmcblk1]:[U-Boot 
> 2019.04-00002-g07d5700e21]:[location: dd MBR]
> UBOOT: Booted Device-Tree:[am335x-boneblack-uboot-univ.dts]
> UBOOT: Loaded Overlay:[AM335X-PRU-RPROC-4-19-TI-00A0]
> UBOOT: Loaded Overlay:[BB-ADC-00A0]
> UBOOT: Loaded Overlay:[BB-BONE-eMMC1-01-00A0]
> UBOOT: Loaded Overlay:[BB-HDMI-TDA998x-00A0]
> kernel:[5.4.38-ti-r8]
> /boot/uEnv.txt Settings:
> uboot_overlay_options:[enable_uboot_overlays=1]
> uboot_overlay_options:[uboot_overlay_pru=/lib/firmware/AM335X-PRU-RPROC-4-19-TI-00A0.dtbo]
> uboot_overlay_options:[enable_uboot_cape_universal=1]
> pkg check: to individually upgrade run: [sudo apt install --only-upgrade 
> <pkg>]
> pkg:[bb-cape-overlays]:[4.14.20200430.0-0~buster+20200430]
> pkg:[bb-wl18xx-firmware]:[1.20200420.1-0~buster+20200424]
> pkg:[kmod]:[26-1]
> WARNING:pkg:[librobotcontrol]:[NOT_INSTALLED]
> pkg:[firmware-ti-connectivity]:[20190717-2rcnee1~buster+20200305]
> groups:[debian : debian adm kmem dialout cdrom floppy audio dip video plugdev 
> users systemd-journal input bluetooth netdev gpio pwm eqep remoteproc admin 
> spi iio i2c docker tisdk weston-launch xenomai cloud9ide]
> cmdline:[console=ttyO0,115200n8 bone_capemgr.uboot_capemgr_enabled=1 
> root=/dev/mmcblk0p1 ro rootfstype=ext4 rootwait coherent_pool=1M 
> net.ifnames=0 lpj=1990656 rng_core.default_quality=100 quiet]
> dmesg | grep remote
> [    2.429955] remoteproc remoteproc0: wkup_m3 is available
> [    2.786315] remoteproc remoteproc1: 4a334000.pru is available
> [    2.788185] remoteproc remoteproc2: 4a338000.pru is available
> [    2.792474] remoteproc remoteproc0: powering up wkup_m3
> [    2.792621] remoteproc remoteproc0: Booting fw image 
> am335x-pm-firmware.elf, size 217168
> [    2.796630] remoteproc remoteproc0: remote processor wkup_m3 is now up
> dmesg | grep pru
> [    2.786315] remoteproc remoteproc1: 4a334000.pru is available
> [    2.786480] pru-rproc 4a334000.pru: PRU rproc node 
> /ocp/interconnect@4a000000/segment@0/target-module@300000/pruss@0/pru@34000 
> probed successfully
> [    2.788185] remoteproc remoteproc2: 4a338000.pru is available
> [    2.788359] pru-rproc 4a338000.pru: PRU rproc node 
> /ocp/interconnect@4a000000/segment@0/target-module@300000/pruss@0/pru@38000 
> probed successfully
> dmesg | grep pinctrl-single
> [    1.737115] pinctrl-single 44e10800.pinmux: 142 pins, size 568
> dmesg | grep gpio-of-helper
> [    1.751795] gpio-of-helper ocp:cape-universal: ready
> END
>
> What Can I do to move on?
> Regards, B
>
> --
> For more options, visit http://beagleboard.org/discuss
> ---
> You received this message because you are subscribed to the Google Groups 
> "BeagleBoard" group.
> To unsubscribe from this group and stop receiving emails from it, send an 
> email to [email protected].
> To view this discussion on the web visit 
> https://groups.google.com/d/msgid/beagleboard/57f22a42-ad76-437c-aba4-835d274e1b8c%40googlegroups.com.



-- 
Robert Nelson
https://rcn-ee.com/

-- 
For more options, visit http://beagleboard.org/discuss
--- 
You received this message because you are subscribed to the Google Groups 
"BeagleBoard" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to [email protected].
To view this discussion on the web visit 
https://groups.google.com/d/msgid/beagleboard/CAOCHtYg%2BJS%2BHbDrs7UuA517jMserVfj%2B%2BgoarCyVSkvVRR403A%40mail.gmail.com.

Reply via email to