Hi, Tried the following steps to flash the BB AI eMMC with the Buster upgrade available at:
https://beagleboard.org/latest-images as below: Buster IoT TIDL (without graphical desktop and with machine learning acceleration tools) for BeagleBone AI <https://beagleboard.org/ai> on-board eMMC flashing via microSD card - AM5729 Debian 10.3 2020-04-06 16GB eMMC IoT TIDL Flasher <https://debian.beagleboard.org/images/am57xx-eMMC-flasher-debian-10.3-iot-tidl-armhf-2020-04-06-6gb.img.xz>image for BeagleBone AI <https://beagleboard.org/ai> - more info <https://debian.beagleboard.org/>- sha256sum: 1f1eb317e979712b20c4119d63926eb0fc626ace1909f174bc973d915240ebe1 Steps followed were: 1. Donwload the *am57xx-eMMC-flasher-debian-10.3-iot-tidl-armhf-2020-04-06-6gb.img.xz* zipped file from the above mentioned link. 2. Unzip to obtain the image file (*.img*) and copy the same to an SD card. 3. With the BB-AI powered down, plug in the SD card. 4. Hold the reset s/w and plug in the USB C-type cable to power on the board, release the reset s/w after 5-7s. **Nothing happens hereafter, NO ONBOARD LEDs FLASH UP, just the temperature shoots up** 5. Removed the USB C-type cable after 90mins, and the older version in the onboard eMMC seems corrupted. Could someone please guide through where we went wrong? Thanks. -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/9cc767d2-6fb5-4676-847c-dc2c5a275f83%40googlegroups.com.
