On Tue, Jun 2, 2020 at 8:59 AM <[email protected]> wrote: > > Hi, > > Tried the following steps to flash the BB AI eMMC with the Buster upgrade > available at: > > https://beagleboard.org/latest-images > > as below: > > Buster IoT TIDL (without graphical desktop and with machine learning > acceleration tools) for BeagleBone AI on-board eMMC flashing via microSD card > > AM5729 Debian 10.3 2020-04-06 16GB eMMC IoT TIDL Flasher image for BeagleBone > AI - more info - sha256sum: > 1f1eb317e979712b20c4119d63926eb0fc626ace1909f174bc973d915240ebe1 > > Steps followed were: > 1. Donwload the > am57xx-eMMC-flasher-debian-10.3-iot-tidl-armhf-2020-04-06-6gb.img.xz zipped > file from the above mentioned link. > 2. Unzip to obtain the image file (.img) and copy the same to an SD card.
Please just use "etcher.io" https://www.balena.io/etcher/ Some of the older windows tools have been reported broken and seem to corrupt the installed image.. > 3. With the BB-AI powered down, plug in the SD card. > 4. Hold the reset s/w and plug in the USB C-type cable to power on the board, > release the reset s/w after 5-7s. > **Nothing happens hereafter, NO ONBOARD LEDs FLASH UP, just the temperature > shoots up** on the BBAI you don't need to worry about the push button.. > 5. Removed the USB C-type cable after 90mins, and the older version in the > onboard eMMC seems corrupted. > > Could someone please guide through where we went wrong? Regards, -- Robert Nelson https://rcn-ee.com/ -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/CAOCHtYhskXAz5MzhazLhA7_XS16oWDv1dXSqzWNBEnUCTJoStQ%40mail.gmail.com.
