Hello,

how to flash system image created by buildroot to internal eMMC memory in 
BBB?

Here is what I'm doing:

1. Build image with buildroot
2. Write sdcard.img to SD card
3. Boot BBB from SD card
4. Increase root partition on SD card: resize2fs /dev/mmcblk0p2
5. scp sdcard.img from PC to BBB: scp output/images/sdcard.img 
[email protected]:/root/
6. Boot BBB from SD card
7. Write sdcard.img to internal eMMC od BBB: dd if=sdcard.img 
of=/dev/mmcblk1
8. Poweroff BBB
9. Remove SD card from BBB
10. Power on BBB.

Here is the output from console:

U-Boot SPL 2019.07 (Jun 02 2020 - 16:55:38 +0200)
> Trying to boot from MMC2
>
> U-Boot 2019.07 (Jun 02 2020 - 16:55:38 +0200)
> CPU  : AM335X-GP rev 2.1
> Model: TI AM335x BeagleBone Black
> DRAM:  512 MiB
> NAND:  0 MiB
> MMC:   OMAP SD/MMC: 0, OMAP SD/MMC: 1
> Loading Environment from FAT... <ethaddr> not set. Validating first E-fuse 
> MAC
> Net:   eth0: ethernet@4a100000
> Warning: usb_ether MAC addresses don't match:
> Address in ROM is          de:ad:be:ef:00:01
> Address in environment is  0c:b2:b7:cd:44:35
> , eth1: usb_ether
> Hit any key to stop autoboot:  0
> switch to partitions #0, OK
> mmc1(part 0) is current device
> SD/MMC found on device 1
> ## Error: "bootcmd_nand0" not defined
> starting USB...
> Bus usb@47401800: Port not available.
> ethernet@4a100000 Waiting for PHY auto negotiation to complete... done
> link up on port 0, speed 100, full duplex
> BOOTP broadcast 1
> DHCP client bound to address 192.168.1.213 (6 ms)
> Using ethernet@4a100000 device
> TFTP from server 192.168.1.1; our IP address is 192.168.1.213
> Filename 'zImage'.
> Load address: 0x82000000
> Loading: T



What should I fix to properly run my BBB from eMMC?


-- 
For more options, visit http://beagleboard.org/discuss
--- 
You received this message because you are subscribed to the Google Groups 
"BeagleBoard" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to [email protected].
To view this discussion on the web visit 
https://groups.google.com/d/msgid/beagleboard/7cf87e6c-8df7-40e2-beb4-6381329c3275%40googlegroups.com.

Reply via email to