Glad for you! It's strange, in my project P1.7 is unconnected, and 4G modem works like a charm for 24/7.
пятница, 12 июня 2020 г., 9:41:34 UTC+3 пользователь Brett Maurer написал: > > I want to follow up on this post in the event that someone else is > experiencing the same problem. > > I implemented a USB power switch as shown in the below schematic. I have > not seen a recurrence of the hot CPU problem after much testing. The 3G > modem and software have been working perfectly. > > One point of note: Originally, I left P1.7 (USB1.VIN) hanging open but was > experiencing a random reboot a few times per day. I connected P1.7 to P1.5 > and the problem went away. I don't know if this is a bad solution but have > not seen any problems yet. > > Thanks again Oleg for pointing me in the right direction. > > [image: USB Config.png] > > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/8e871406-625a-4909-ac48-3bae6417c5c5o%40googlegroups.com.
