Hi, Thanks for the info provided. I tried with balenaEtcher it worked.
Regards, Prudhvi On Mon, Aug 10, 2020, 00:35 Dennis Lee Bieber <[email protected]> wrote: > On Sat, 8 Aug 2020 10:48:15 -0700 (PDT), in > gmane.comp.hardware.beagleboard.user prudhviraj odela > <[email protected]> wrote: > > > > >Hi, > > > >I am new to embedded linux. > >I am trying to boot from uSD and flash eMMC. > >I copied .img of debian image to sd card using > >dd if=<bone-debian-10.4-lxqt-armhf-2020-05-18-4gb.img> of=/dev/sdb > > I'd suggest downloading the appropriate version of > https://www.balena.io/etcher/ and using it to create the SD card. > > >Later, when I tried to boot from SD card its not booting. > > > How old is the current eMMC image? Holding down the boot select > button > has not been required since the last Wheezy (7.x) as I recall, though with > the change from kernel loaded device tree to u-boot loaded device tree > (which occurred sometime in Jessie (8.x) as I recall) it may require > flashing a new u-boot first. > > Did you already edit that image into a flasher? I'd normally wait > until > it boots successfully before changing into a flasher and rebooting. > > >Observed only Linux partition. I don't know does the image had boot part. > > That too is normal for quite some time now. The "beginning" > partition > that shows up on Windows is not real -- it's a file image mapped to a USB > gadget. > > > -- > Dennis L Bieber > > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to the Google Groups > "BeagleBoard" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > To view this discussion on the web visit > https://groups.google.com/d/msgid/beagleboard/q4i0jf50n1ke2lfosdfg416ecqq18qlgmq%404ax.com > . > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/CAMtdsb0g%2B8A%3DKoOJrPe-PPG2pb%2BWg4ZwaCx3Db4MssNUXegotw%40mail.gmail.com.
