On Thu, Aug 20, 2020, 7:18 AM Pavel Yermolenko <[email protected]> wrote:
> Yesterday serial terminal worked with Linux, booted from eMMC. > I've just tried to boot from sd-card with just two files: MLO and > u-boot.img. > Here is what I see in terminal: > ...... > Retrieving file: pxelinux.cfg/default-arm-am33xx > ethernet@4a100000 Waiting for PHY auto negotiation to complete......... > TIMEOUT ! > using musb-hdrc, OUT ep1out IN ep1in STATUS ep2in > MAC de:ad:be:ef:00:01 > HOST MAC de:ad:be:ef:00:00 > RNDIS ready > Retrieving file: pxelinux.cfg/default-arm > ethernet@4a100000 Waiting for PHY auto negotiation to complete......... > TIMEOUT ! > using musb-hdrc, OUT ep1out IN ep1in STATUS ep2in > MAC de:ad:be:ef:00:01 > HOST MAC de:ad:be:ef:00:00 > RNDIS ready > Retrieving file: pxelinux.cfg/default > ethernet@4a100000 Waiting for PHY auto negotiation to complete......... > TIMEOUT ! > using musb-hdrc, OUT ep1out IN ep1in STATUS ep2in > MAC de:ad:be:ef:00:01 > HOST MAC de:ad:be:ef:00:00 > RNDIS ready > Config file not found > starting USB... > Bus usb@47401800: Port not available. > ethernet@4a100000 Waiting for PHY auto negotiation to complete......... > TIMEOUT ! > using musb-hdrc, OUT ep1out IN ep1in STATUS ep2in > MAC de:ad:be:ef:00:01 > HOST MAC de:ad:be:ef:00:00 > RNDIS ready > ethernet@4a100000 Waiting for PHY auto negotiation to complete......... > TIMEOUT ! > using musb-hdrc, OUT ep1out IN ep1in STATUS ep2in > MAC de:ad:be:ef:00:01 > HOST MAC de:ad:be:ef:00:00 > RNDIS ready > => > > These messages with TIMEOUT continued about 5 min. > And finally some prompt (i.e. symbol '=>') appeared instead of *U-Boot#* > prompt. > > For building U-Boot I cloned "master" image from *gitlab.denx.de/u-boot/ > <http://gitlab.denx.de/u-boot/>* and used *am335x_evm_defconfig* for > default configuration. > > Any suggestions ? > With mainline generate an extlinux.conf file. There's a basic script under /opt/scripts/ Sorry on mobile. Regards, -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/CAOCHtYj%3DOuvs%2BKq5HbHGjCBE0_n5sKLQ11vC%2Bo0iAHZRzJrm-Q%40mail.gmail.com.
