Hi Robert, Sorry, I didn't properly understand your message. I don't remember which branch of u-boot I tried yesterday, but today I've tried with "master" using *am335x_boneblack_vboot_defconfig *as default configuration.
Here is what I see in terminal this time: U-Boot SPL 2020.10-rc2-00162-g2a4484a5c5 (Aug 21 2020 - 14:14:42 +0200) WDT: Not found! Trying to boot from MMC1 Loading Environment from FAT... *** Warning - bad CRC, using default environment Loading Environment from MMC... *** Warning - bad CRC, using default environment U-Boot 2020.10-rc2-00162-g2a4484a5c5 (Aug 21 2020 - 14:14:42 +0200) CPU : AM335X-GP rev 2.1 Model: TI AM335x BeagleBone Black DRAM: 512 MiB MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1 Loading Environment from FAT... *** Warning - bad CRC, using default environment Loading Environment from MMC... *** Warning - bad CRC, using default environment <ethaddr> not set. Validating first E-fuse MAC Net: eth2: ethernet@4a100000, eth3: usb_ether Press SPACE to abort autoboot in 2 seconds switch to partitions #0, OK mmc0 is current device SD/MMC found on device 0 Failed to load 'boot.scr' Failed to load 'uEnv.txt' switch to partitions #0, OK mmc0 is current device Scanning mmc 0:1... switch to partitions #0, OK mmc0 is current device SD/MMC found on device 0 Failed to load '/boot/zImage' switch to partitions #0, OK mmc1(part 0) is current device Scanning mmc 1:1... switch to partitions #0, OK mmc1(part 0) is current device SD/MMC found on device 1 ** Invalid partition 2 ** ## Error: "bootcmd_nand0" not defined starting USB... Bus usb@47401800: Port not available. link up on port 0, speed 100, full duplex BOOTP broadcast 1 BOOTP broadcast 2 BOOTP broadcast 3 BOOTP broadcast 4 DHCP client bound to address 10.42.0.39 (3048 ms) Using ethernet@4a100000 device TFTP from server 10.42.0.1; our IP address is 10.42.0.39 Filename 'zImage'. Load address: 0x82000000 Loading: T T T T T T T T T T T T T T T T T T T T Retry count exceeded; starting again missing environment variable: pxeuuid Retrieving file: pxelinux.cfg/01-94-e3-6d-d4-ae-86 link up on port 0, speed 100, full duplex Using ethernet@4a100000 device TFTP from server 10.42.0.1; our IP address is 10.42.0.39 Filename 'pxelinux.cfg/01-94-e3-6d-d4-ae-86'. Load address: 0x80100000 Loading: T T T T T T T T T T T T T T T T T T T T Retry count exceeded; starting again Retrieving file: pxelinux.cfg/0A2A0027 link up on port 0, speed 100, full duplex Using ethernet@4a100000 device TFTP from server 10.42.0.1; our IP address is 10.42.0.39 Filename 'pxelinux.cfg/0A2A0027'. Load address: 0x80100000 Loading: T T T T T T T T T T T T T Sincerely, Pavel. > With mainline generate an extlinux.conf file. > > There's a basic script under /opt/scripts/ > > Sorry on mobile. > > Regards, > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/7bf94bff-0e86-4c89-a831-71f8f4894e14o%40googlegroups.com.
