Let's see your serial boot log from j1 header to see where it's getting stick..
On Sat, Aug 22, 2020, 3:35 PM jonnymo <[email protected]> wrote: > Could you post the strange message you are seeing regarding the uSD card? > > For me, going from 9.9 to 9.13 and beyond, I would just do a reflash of > the image. > > Which rev of BBB do you have? Rev B or Rev C? > > Robert is the master of this so I would think his suggestions would clear > the issue. > > Cheers, > > Jon > > On Sat, Aug 22, 2020 at 1:04 PM Hartley Sweeten <[email protected]> > wrote: > >> >> Hi Jon, >> >> I have already seen that post. It doesn't help since it requires >> reflashing the board. >> >> I had another board that I did the same 'apt update/upgrade' on and had >> the same problem. >> >> BTW, If have not been able to get that board to reflash, it keeps giving >> me some strange error message about the SD-Card, still have not figured >> that out. The SD-Card worked fine on a different BBB. >> >> I would like to know if there is a way to fix this without reflashing the >> board. >> >> I guess a bigger question is - Does upgrading the console image from >> Debian 9.9 to 9.13 actually work? >> >> Hartley >> >> On Saturday, August 22, 2020 at 11:28:22 AM UTC-7 [email protected] >> wrote: >> >>> This may help: >>> >>> >>> https://forum.digikey.com/t/beablebone-black-boot-issue-dev-mmcblk1p1-does-not-exist/7717 >>> >>> >>> Cheers, >>> >>> Jon >>> >>> On Sat, Aug 22, 2020 at 10:47 AM Hartley Sweeten <[email protected]> >>> wrote: >>> >>>> Hello all, >>>> >>>> I had an old Debian 9.9 console image on my BBB and did an apt upgrade >>>> that bumped it to Debian 9.13. Now the board does not boot. >>>> >>>> If I hook up a serial console I see it keeps stopping at: >>>> >>>> Starting kernel ... >>>> >>>> [ 0.001033] clocksource_probe: no matching clocksources found >>>> [ 1.312908] wkup_m3_ipc 44e11324.wkup_m3_ipc: could not get rproc >>>> handle >>>> [ 1.487471] omap_hsmmc 481d8000.mmc: prop pinctrl-0 index 0 invalid >>>> phandle >>>> [ 1.522392] omap_voltage_late_init: Voltage driver support not added >>>> [ 1.529573] PM: Cannot get wkup_m3_ipc handle >>>> [ 1.807980] bone_capemgr bone_capemgr: slot #0: No cape found >>>> [ 1.839062] bone_capemgr bone_capemgr: slot #1: No cape found >>>> [ 1.871759] bone_capemgr bone_capemgr: slot #2: No cape found >>>> [ 1.904436] bone_capemgr bone_capemgr: slot #3: No cape found >>>> Gave up waiting for root file system device. Common problems: >>>> - Boot args (cat /proc/cmdline) >>>> - Check rootdelay= (did the system wait long enough?) >>>> - Missing modules (cat /proc/modules; ls /dev) >>>> ALERT! /dev/mmcblk1p1 does not exist. Dropping to a shell! >>>> (initramfs) >>>> >>>> Is there any way to fix this other than reflashing? >>>> >>>> Thanks >>>> >>>> -- >>>> For more options, visit http://beagleboard.org/discuss >>>> --- >>>> You received this message because you are subscribed to the Google >>>> Groups "BeagleBoard" group. >>>> To unsubscribe from this group and stop receiving emails from it, send >>>> an email to [email protected]. >>>> To view this discussion on the web visit >>>> https://groups.google.com/d/msgid/beagleboard/960431ee-a19f-4425-b2c5-b06f4ec63229o%40googlegroups.com >>>> <https://groups.google.com/d/msgid/beagleboard/960431ee-a19f-4425-b2c5-b06f4ec63229o%40googlegroups.com?utm_medium=email&utm_source=footer> >>>> . >>>> >>> -- >> For more options, visit http://beagleboard.org/discuss >> --- >> You received this message because you are subscribed to the Google Groups >> "BeagleBoard" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to [email protected]. >> To view this discussion on the web visit >> https://groups.google.com/d/msgid/beagleboard/a55e5f2b-e111-4624-ae1c-41419050a951n%40googlegroups.com >> <https://groups.google.com/d/msgid/beagleboard/a55e5f2b-e111-4624-ae1c-41419050a951n%40googlegroups.com?utm_medium=email&utm_source=footer> >> . >> > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to the Google Groups > "BeagleBoard" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > To view this discussion on the web visit > https://groups.google.com/d/msgid/beagleboard/CAG99bkqAMNPGsruTihkOjT9cykvcUycrgc8%3DXj7zGV5yoH%2BwUA%40mail.gmail.com > <https://groups.google.com/d/msgid/beagleboard/CAG99bkqAMNPGsruTihkOjT9cykvcUycrgc8%3DXj7zGV5yoH%2BwUA%40mail.gmail.com?utm_medium=email&utm_source=footer> > . > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/CAOCHtYjrF_X1xpVQicKU8eRyW2fjcmcNDv%2BFJgCC9QopZpJPBg%40mail.gmail.com.
