On Sat, Aug 22, 2020 at 5:15 PM Hartley Sweeten <[email protected]> wrote: > > Hi Robert, > > Quick background on this. > > I have a "standard" image I use that is based on the Console Debian 9 image. > I usually keep it pretty up-to-date but have not updated it since Debian 9.9. > > I was trying to update it to the latest Debian 9.13 using apt update/upgrade. > This has always worked in the past. > > But going from 9.9 to 9.13 I can no longer get the BeagleBone Black to boot. > This has happened on 2 different BeagleBone Black's so far. > > Here is the serial log: > > --- > > U-Boot SPL 2018.01-00002-g9aa111a004 (Jan 20 2018 - 12:45:29) > Trying to boot from MMC2 > > > U-Boot 2018.01-00002-g9aa111a004 (Jan 20 2018 - 12:45:29 -0600), Build: > jenkins-github_Bootloader-Builder-32 > > CPU : AM335X-GP rev 2.1 > I2C: ready > DRAM: 512 MiB > No match for driver 'omap_hsmmc' > No match for driver 'omap_hsmmc' > Some drivers were not found > Reset Source: Power-on reset has occurred. > MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1 > Using default environment > > Board: BeagleBone Black > <ethaddr> not set. Validating first E-fuse MAC > BeagleBone Black: > BeagleBone: cape eeprom: i2c_probe: 0x54: > BeagleBone: cape eeprom: i2c_probe: 0x55: > BeagleBone: cape eeprom: i2c_probe: 0x56: > BeagleBone: cape eeprom: i2c_probe: 0x57: > Net: eth0: MII MODE > cpsw, usb_ether > Press SPACE to abort autoboot in 2 seconds > board_name=[A335BNLT] ... > board_rev=[00C0] ... > Card did not respond to voltage select! > mmc_init: -95, time 12 > Card did not respond to voltage select! > mmc_init: -95, time 13 > Card did not respond to voltage select! > mmc_init: -95, time 13 > gpio: pin 56 (gpio 56) value is 0 > gpio: pin 55 (gpio 55) value is 0 > gpio: pin 54 (gpio 54) value is 0 > gpio: pin 53 (gpio 53) value is 1 > Card did not respond to voltage select! > mmc_init: -95, time 13 > Card did not respond to voltage select! > mmc_init: -95, time 13 > switch to partitions #0, OK > mmc1(part 0) is current device > Scanning mmc 1:1... > gpio: pin 56 (gpio 56) value is 0 > gpio: pin 55 (gpio 55) value is 0 > gpio: pin 54 (gpio 54) value is 0 > gpio: pin 53 (gpio 53) value is 1 > switch to partitions #0, OK > mmc1(part 0) is current device > gpio: pin 54 (gpio 54) value is 1 > Checking for: /uEnv.txt ... > Checking for: /boot.scr ... > Checking for: /boot/boot.scr ... > Checking for: /boot/uEnv.txt ... > gpio: pin 55 (gpio 55) value is 1 > 2190 bytes read in 15 ms (142.6 KiB/s) > Loaded environment from /boot/uEnv.txt > Checking if uname_r is set in /boot/uEnv.txt... > gpio: pin 56 (gpio 56) value is 1 > Running uname_boot ... > loading /boot/vmlinuz-4.9.105-ti-r114 ... > 9818560 bytes read in 636 ms (14.7 MiB/s) > uboot_overlays: [uboot_base_dtb=am335x-boneblack-uboot.dtb] ... > uboot_overlays: Switching too: dtb=am335x-boneblack-uboot.dtb ... > loading /boot/dtbs/4.9.105-ti-r114/am335x-boneblack-uboot.dtb ... > 61638 bytes read in 44 ms (1.3 MiB/s) > uboot_overlays: [fdt_buffer=0x60000] ... > uboot_overlays: loading /lib/firmware/BB-BONE-eMMC1-01-00A0.dtbo ... > 1584 bytes read in 219 ms (6.8 KiB/s) > uboot_overlays: loading /lib/firmware/BB-HDMI-TDA998x-00A0.dtbo ... > 4915 bytes read in 64 ms (74.2 KiB/s) > uboot_overlays: loading /lib/firmware/BB-ADC-00A0.dtbo ... > 867 bytes read in 204 ms (3.9 KiB/s) > uboot_overlays: unable to find [mmc 1:1 > /lib/firmware/univ-bbb-EVA-00A0.dtbo]... > loading /boot/initrd.img-4.9.105-ti-r114 ... > 5790384 bytes read in 380 ms (14.5 MiB/s) > debug: [console=ttyO0,115200n8 root=/dev/mmcblk1p1 ro rootfstype=ext4 > rootwait coherent_pool=1M net.ifnames=0 quiet] ...
Want to remove "quiet" so we can see what really failed? Regards, -- Robert Nelson https://rcn-ee.com/ -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/CAOCHtYiN0dU2pz14oRgSEdN-UnLVf1UXi4aEYEmJ8ZAdLOiF1A%40mail.gmail.com.
