Wait, that's btrfs snapshots, which also works today.. On Fri, Sep 18, 2020, 12:01 PM John Allwine <[email protected]> wrote:
> The ultimate goal here would be to be able to essentially flash a board, > but always be able to revert to a previously installed firmware. So rather > than always flash the eMMC, leverage a much larger microSD card that could > have several different images and instead of ever overwriting them, > allocate spare space to a new partition and change whatever setting is > necessary to default to booting to that partition (and provide some > interface for reverting to any previous one). > > On Fri, Sep 18, 2020 at 10:50 AM John Allwine <[email protected]> wrote: > >> Thanks Robert! I'll give it a try. It sounds like 4 different images >> would be the limit using that strategy? Let's say I had a 256GB microSD >> card with 10 different partitions. Any idea on what I would have to change >> to be able to select one besides one of the first 4? >> >> On Friday, September 18, 2020 at 8:55:48 AM UTC-6 RobertCNelson wrote: >> >>> On Fri, Sep 18, 2020 at 9:47 AM John Allwine <[email protected]> >>> wrote: >>> > >>> > Has anyone partitioned a microSD card such that it can be booted into >>> different partitions on a Beaglebone Black or AI? How would I go about >>> doing something like that? I'd like to avoid needing to physically take out >>> the microSD card and potentially add bootable partitions over time. Would >>> that be doable from the Beaglebone itself? >>> >>> We use "/boot/uEnv.txt" as a trigger file.. >>> >>> Take an existing partition, shrink it to half, (dont' touch the 4mb >>> hole), then clone that partition to the empy space (and update it's >>> /etc/fstab).. >>> >>> On startup, u-boot will search the first 4 partitions for >>> "/boot/uEnv.txt" so either rename the one on the first partition to >>> the boot the second/etc.. >>> >>> There's probably a better way, but this will just work with the >>> existing setup with the fewest mod's.. >>> >>> Regards, >>> >>> -- >>> Robert Nelson >>> https://rcn-ee.com/ >>> >> -- >> For more options, visit http://beagleboard.org/discuss >> --- >> You received this message because you are subscribed to the Google Groups >> "BeagleBoard" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to [email protected]. >> To view this discussion on the web visit >> https://groups.google.com/d/msgid/beagleboard/15487b80-ad54-40df-9079-e12f60368419n%40googlegroups.com >> <https://groups.google.com/d/msgid/beagleboard/15487b80-ad54-40df-9079-e12f60368419n%40googlegroups.com?utm_medium=email&utm_source=footer> >> . >> > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to the Google Groups > "BeagleBoard" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > To view this discussion on the web visit > https://groups.google.com/d/msgid/beagleboard/CAPEK9qafMH2HPHuxq%2BUETxaTR4bmD8TACDnn0zdrTTsGYekmNQ%40mail.gmail.com > <https://groups.google.com/d/msgid/beagleboard/CAPEK9qafMH2HPHuxq%2BUETxaTR4bmD8TACDnn0zdrTTsGYekmNQ%40mail.gmail.com?utm_medium=email&utm_source=footer> > . > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/CAOCHtYjdsH2_rANh9JQRoJYKzyEdq-7NnkvaaMcsW2Xp39hk1Q%40mail.gmail.com.
