On Mon, Sep 21, 2020 at 10:58 AM John Allwine <[email protected]> wrote: > > Thanks Robert! It sounds like it's straight forward, but I'm not familiar > with the image creation process at all. When and where would I call > setup_sdcard.sh?
For example, let's take this image: https://rcn-ee.net/rootfs/bb.org/testing/2020-09-21/buster-iot/ if we ignore the am57xx files, there are only 2 for BBB's.. bone-debian-*.img.xz and bone-eMMC-*.img.xz Those were both generated from inside this archive (once extracted), setup_sdcard.sh is inside the archive: debian-10.5-iot-armhf-2020-09-21.tar.xz via: sudo ./setup_sdcard.sh --img-4gb bone-debian-10.5-iot-armhf-2020-09-21 --dtb beaglebone --rootfs_label rootfs --hostname beaglebone --enable-cape-universal --enable-uboot-pru-rproc-419ti sudo ./setup_sdcard.sh --img-4gb bone-eMMC-flasher-debian-10.5-iot-armhf-2020-09-21 --dtb beaglebone --rootfs_label rootfs --hostname beaglebone --enable-cape-universal --enable-uboot-pru-rproc-419ti --emmc-flasher Just add "--rootfs btrfs" Regards, -- Robert Nelson https://rcn-ee.com/ -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/CAOCHtYi6S0rEyM%3DDsT-dvq7OF7CO8VeWy3PQOnTmp7JLCBzz-Q%40mail.gmail.com.
