I have used "*AM3358 Debian 10.3 2020-04-06 4GB SD IoT*" image file and I used "*rufus 3.1*" to flash the image. As I said, all 4 leds lighted up sequencially and after a while the user0 led flashed like a heartbeat and user1 led kept flashing randomly. That is normal as I have read, but still in my computer no device was detected. After some unplugging and plugging, I used "*Etcher*" to flash the image. Then I flashed some older images like "*Debian 9.9 2019-08-03 4GB SD IoT*" and "*AM3358 Debian 10.0 2019-07-07 4GB SD IoT*" with "Etcher" too. I have tried a different sd card but nothing changed. Yesterday when I plugged Beagle in the usb port, an "RNDIS...." message appeard but not any connection and only user0 led stays constantly lit. User0 led is about kernel, so is there any damage inside the chip?
Στις Σάββατο, 5 Δεκεμβρίου 2020 στις 2:39:17 π.μ. UTC+2, ο χρήστης [email protected] έγραψε: > What image did you flash to the uSD card? > What tool did you use to flash the image to the uSD card? > > Cheers, > > Jon > > On Fri, Dec 4, 2020 at 12:36 PM John Bacas <[email protected]> wrote: > >> Hi, I'm a newbie with beagle board and I have a problem with my pocket >> one. >> I did all according to the quick start guide. >> When i plugged it to my pc all 4 leds lighted up sequentially but I was >> waiting for 1 minute and nothing happened. There wasn't any new drive >> appearing in my windows explorer. >> Unplugged it without turning it off and plugged it again. Same bahavior. >> After a lot o sd card flashing and tries to boot, things got worse. >> Now when i plug the board only user0 led lights up and stays open. >> Have I damaged it ? How can I check if it has damage? >> Can I fix it ? >> >> Thanks >> >> -- >> For more options, visit http://beagleboard.org/discuss >> --- >> You received this message because you are subscribed to the Google Groups >> "BeagleBoard" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to [email protected]. >> To view this discussion on the web visit >> https://groups.google.com/d/msgid/beagleboard/744326f5-f51d-4c41-9771-da5272edb840n%40googlegroups.com >> >> <https://groups.google.com/d/msgid/beagleboard/744326f5-f51d-4c41-9771-da5272edb840n%40googlegroups.com?utm_medium=email&utm_source=footer> >> . >> > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/688b764d-8c22-4429-97d1-39356414818dn%40googlegroups.com.
