On Tue, Feb 9, 2021 at 11:13 AM Joseph Tarnow <[email protected]> wrote: > > Howdy dudes and dudettes, > > I have a Beagleboard x15, and I am trying to make it boot on power, so if I > lose power the board will start when power resumes. I found this thread, but > couldn't make sense of it. Perhaps my google foo is bad, but I couldn't find > anything else. Does anyone know how to do this?
Here's a quick answer.. Users debugging with JTAG have the same issue as above.. So look at your board, find J5, then proceed to solder the two holes together with a wire.. But here's the warning.. If you boot with a blank eMMC and a blank microSD, so U-BOOT does NOT LOAD... Given enough time with this situation you will destroy the AM57xx and it'll never boot again... Regards, -- Robert Nelson https://rcn-ee.com/ -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/CAOCHtYit67Q1%3Dd9U6X%2BF-K%3DVWdi9cb3QqEuoKu2Ord_yrH5meQ%40mail.gmail.com.
