Sweet thank you! It took me an embarrassingly long time to find J5.. I was looking over by J3,4,6, turns out its in the middle between U5, U18.
It works well! On Tuesday, February 9, 2021 at 9:18:54 AM UTC-8 RobertCNelson wrote: > On Tue, Feb 9, 2021 at 11:13 AM Joseph Tarnow > <[email protected]> wrote: > > > > Howdy dudes and dudettes, > > > > I have a Beagleboard x15, and I am trying to make it boot on power, so > if I lose power the board will start when power resumes. I found this > thread, but couldn't make sense of it. Perhaps my google foo is bad, but I > couldn't find anything else. Does anyone know how to do this? > > Here's a quick answer.. Users debugging with JTAG have the same issue > as above.. > > So look at your board, find J5, then proceed to solder the two holes > together with a wire.. > > But here's the warning.. If you boot with a blank eMMC and a blank > microSD, so U-BOOT does NOT LOAD... Given enough time with this > situation you will destroy the AM57xx and it'll never boot again... > > Regards, > > -- > Robert Nelson > https://rcn-ee.com/ > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/7b14a3e3-e6a1-44db-a894-64b828156129n%40googlegroups.com.
