Hi John, the LCD Display is good. Think my defektive Beaglebone USB connector is also the reason for undeted WIFI .... will try again. Kasimir
John Dammeyer <jo...@autoartisans.com> schrieb am Fr., 4. Juni 2021, 00:26: > The reason I ask is based on the information here: > > https://elinux.org/Beagleboard:BeagleBoneBlack_HDMI > > > > In the past I've had the most success using an external HDMI to VGA > connector that then feeds into a Viewsonic LED 1080P Full HD monitor. > VX2753MH-LED. This one doesn't really like 1920x1080@30 so the Beagle > has trouble talking to it. > > https://www.viewsonic.com/nz/products/lcd/vx2753mh-led > > > > > > Do these smaller displays present as 30Hz? Seems given the capabilities > of the BBB it might be better to target a small 7" to 10" LCD display in > the 1280x768 size. I know I had a lot of trouble with the Mango screens > for the Replicape project with the higher resolution. Touch on the > Manga1 was crap. Support for the entire project kind of vanished and now > it turns out one of the stepper drivers is toast. Never really got far > with the Manga2 after all that > > > > But the point is the higher res screens on a small physical footprint > don't do much so I was curious about this display and how well the touch > actually worked. > > > > John > > > > > > *From:* beagleboard@googlegroups.com [mailto:beagleboard@googlegroups.com] > *On Behalf Of *Peter Lange > *Sent:* June-03-21 2:51 PM > *To:* beagleboard@googlegroups.com > *Subject:* Re: [beagleboard] Re: BeagleBone Black (C) USB based touch not > working > > > > It was the Beaglebone USB connector. > > Touch is currently not calibrated. > > But on my WIN10 PC it works fine. Can recommend the display. > > > > John Dammeyer <jo...@autoartisans.com> schrieb am Do., 3. Juni 2021, > 22:27: > > So it was the display USB that had the issue. Not the BBB. > > How do you like the touch response on that display? > > > > *From:* beagleboard@googlegroups.com [mailto:beagleboard@googlegroups.com] > *On Behalf Of *Peter Lange > *Sent:* June-03-21 12:28 PM > *To:* beagleboard@googlegroups.com > *Subject:* Re: [beagleboard] Re: BeagleBone Black (C) USB based touch not > working > > > > Hi Robert, > > it's solved. Hardware, the USB connector. > > Was able to solder, now it works fine. > > Sometimes there was a second entry with lsusb. Then I found out, it's the > connector, with a little pressure it worked. > > Then microscope, solder iron.... > > I spent 2 days and nights on that 😠> > But I learned a Lot > > Thanks to all > > Kasimir > > > > Robert Nelson <robertcnel...@gmail.com> schrieb am Do., 3. Juni 2021, > 15:37: > > > > > The project requires the pru units, that works fine. > > Touch is eating up my time. And I expect it makes no sense to order > other touch displays and the status is still the same. > > USB based touch was expected as "best and simple" solution. I need SPI > and GPIO for surrounding hardware. That works fine. > > HDMI is required to have the possibility to connect "any" monitor. There > is 1m distance between BBB and display. > > RPI is not an option for me, because I need the PRU's. > > lsusb ? i don't see it showing up in dmesg.. > > Regards, > > -- > Robert Nelson > https://rcn-ee.com/ > > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to a topic in the > Google Groups "BeagleBoard" group. > To unsubscribe from this topic, visit > https://groups.google.com/d/topic/beagleboard/qynrtLRdkvU/unsubscribe. > To unsubscribe from this group and all its topics, send an email to > beagleboard+unsubscr...@googlegroups.com. > To view this discussion on the web visit > https://groups.google.com/d/msgid/beagleboard/CAOCHtYg%3DBonY6FnKgsxP%2B5SEdP1g376ZnAGYXnuFwCY9Tj2Tsw%40mail.gmail.com > . > > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to the Google Groups > "BeagleBoard" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to beagleboard+unsubscr...@googlegroups.com. > To view this discussion on the web visit > https://groups.google.com/d/msgid/beagleboard/CAHjW%3DhcB01%2B6gG1uZB%3DZt5jzcv-kHMOEW8htttCHd4XBdN%2BSUw%40mail.gmail.com > <https://groups.google.com/d/msgid/beagleboard/CAHjW%3DhcB01%2B6gG1uZB%3DZt5jzcv-kHMOEW8htttCHd4XBdN%2BSUw%40mail.gmail.com?utm_medium=email&utm_source=footer> > . > > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to a topic in the > Google Groups "BeagleBoard" group. > To unsubscribe from this topic, visit > https://groups.google.com/d/topic/beagleboard/qynrtLRdkvU/unsubscribe. > To unsubscribe from this group and all its topics, send an email to > beagleboard+unsubscr...@googlegroups.com. > To view this discussion on the web visit > https://groups.google.com/d/msgid/beagleboard/04e101d758b6%24c5218740%244f6495c0%24%40autoartisans.com > <https://groups.google.com/d/msgid/beagleboard/04e101d758b6%24c5218740%244f6495c0%24%40autoartisans.com?utm_medium=email&utm_source=footer> > . > > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to the Google Groups > "BeagleBoard" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to beagleboard+unsubscr...@googlegroups.com. > To view this discussion on the web visit > https://groups.google.com/d/msgid/beagleboard/CAHjW%3Dhd8LLAhRw2wKoK_fVEa1bNsS4KL1wNMk3tNx5rjdE4CEQ%40mail.gmail.com > <https://groups.google.com/d/msgid/beagleboard/CAHjW%3Dhd8LLAhRw2wKoK_fVEa1bNsS4KL1wNMk3tNx5rjdE4CEQ%40mail.gmail.com?utm_medium=email&utm_source=footer> > . > > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to a topic in the > Google Groups "BeagleBoard" group. > To unsubscribe from this topic, visit > https://groups.google.com/d/topic/beagleboard/qynrtLRdkvU/unsubscribe. > To unsubscribe from this group and all its topics, send an email to > beagleboard+unsubscr...@googlegroups.com. > To view this discussion on the web visit > https://groups.google.com/d/msgid/beagleboard/050201d758c7%24708bb820%2451a32860%24%40autoartisans.com > <https://groups.google.com/d/msgid/beagleboard/050201d758c7%24708bb820%2451a32860%24%40autoartisans.com?utm_medium=email&utm_source=footer> > . > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/CAHjW%3DhdEUaOz3JVsUchg%2BdrtH%3DHPZuut4SyLEg7%2BTq6y%3DWYAig%40mail.gmail.com.
