Hello all,

I update my draft. 4PE is introduced in this doc to meet the gap pointed out in 
RFC7439. 4PE routers in IPv6-only MPLS network can use MP-BGP extended in this 
doc to connect IPv4-only islands.. Your comments are very appreciated.



[email protected]
 
From: internet-drafts
Date: 2016-03-09 09:54
To: Zhenqiang Li
Subject: New Version Notification for draft-li-bess-4pe-01.txt
 
A new version of I-D, draft-li-bess-4pe-01.txt
has been successfully submitted by Zhenqiang Li and posted to the
IETF repository.
 
Name: draft-li-bess-4pe
Revision: 01
Title: Connecting IPv4 Islands over IPv6 MPLS Using IPv4 Provider Edge Routers 
(4PE)
Document date: 2016-03-08
Group: Individual Submission
Pages: 9
URL:            https://www.ietf.org/internet-drafts/draft-li-bess-4pe-01.txt
Status:         https://datatracker.ietf.org/doc/draft-li-bess-4pe/
Htmlized:       https://tools.ietf.org/html/draft-li-bess-4pe-01
Diff:           https://www.ietf.org/rfcdiff?url2=draft-li-bess-4pe-01
 
Abstract:
   This document explains how to interconnect IPv4 islands over a
   Multiprotocol Label Switching (MPLS)-enabled IPv6-only core.  This
   approach relies on IPv4 Provider Edge routers (4PE), which are Dual
   Stacks in order to connect to IPv4 islands and to the MPLS core.  The
   4PE routers exchange the IPv4 reachability information transparently
   over the core using the Multiprotocol Border Gateway Protocol (MP-
   BGP).  MP-BGP is extended to do this.  A new Subsequence Address
   Family Identifier (SAFI) with corresponding new format Network Layer
   Reachability Information (NLRI), is introduced.  The BGP Next Hop
   field is used to convey the IPv4 address of the 4PE router, a field
   is added in Network Layer Reachability Information (NLRI) to convey
   the IPv6 address of the 4PE router, so that dynamically established
   IPv6-signaled MPLS Label Switched Paths (LSPs) can be used without
   explicit tunnel configuration.
 
 
                                                                                
  
 
 
Please note that it may take a couple of minutes from the time of submission
until the htmlized version and diff are available at tools.ietf.org.
 
The IETF Secretariat
 
 
_______________________________________________
BESS mailing list
[email protected]
https://www.ietf.org/mailman/listinfo/bess

Reply via email to