+IDR WG Can some one please help on this? Thanks, Tulasi.
On Mon, Jan 18, 2021 at 7:57 AM TULASI RAM REDDY <[email protected]> wrote: > Hi All, > > > > According to below note in “Sec 11.1. Constructing Inclusive Multicast > Ethernet Tag Route”, It looks implementation can > > use BGP router ID(32-bit) as Originating Router's IP Address even with > pure IPv6 deployment.. > > > > If the implementation choose this way, does it cause any known > interoperable issues or > > It is expected to use IPv6 loopback address here as the originating router > IP address with IPv6 BGP peering? > > > > It will be great, if someone throws light on the major implementations > here.. > > > > <snip: “Sec 11.1. Constructing Inclusive Multicast Ethernet Tag Route”> > > The Originating Router's IP Address field value MUST be set to an IP > > address of the PE that should be common for all the EVIs on the PE > > (e.g., this address may be the PE's loopback address). The IP > > Address Length field is in bits. > > </snip> > > > > Thanks, > > Tulasi. > -- TULASI RAMI REDDY N
_______________________________________________ BESS mailing list [email protected] https://www.ietf.org/mailman/listinfo/bess
