Hi All, Awaiting for inputs on this.
Thanks, Tulasi. On Tue, Jan 19, 2021 at 11:04 AM TULASI RAM REDDY <[email protected]> wrote: > +IDR WG > Can some one please help on this? > > Thanks, > Tulasi. > > On Mon, Jan 18, 2021 at 7:57 AM TULASI RAM REDDY < > [email protected]> wrote: > >> Hi All, >> >> >> >> According to below note in “Sec 11.1. Constructing Inclusive Multicast >> Ethernet Tag Route”, It looks implementation can >> >> use BGP router ID(32-bit) as Originating Router's IP Address even with >> pure IPv6 deployment.. >> >> >> >> If the implementation choose this way, does it cause any known >> interoperable issues or >> >> It is expected to use IPv6 loopback address here as the originating >> router IP address with IPv6 BGP peering? >> >> >> >> It will be great, if someone throws light on the major implementations >> here.. >> >> >> >> <snip: “Sec 11.1. Constructing Inclusive Multicast Ethernet Tag Route”> >> >> The Originating Router's IP Address field value MUST be set to an IP >> >> address of the PE that should be common for all the EVIs on the PE >> >> (e.g., this address may be the PE's loopback address). The IP >> >> Address Length field is in bits. >> >> </snip> >> >> >> >> Thanks, >> >> Tulasi. >> > > > -- > TULASI RAMI REDDY N > -- TULASI RAMI REDDY N
_______________________________________________ BESS mailing list [email protected] https://www.ietf.org/mailman/listinfo/bess
