Can you try the following steps?
1. download and install a fresh j802 .
2. copy your jqt and libjqt.so to ~bin
3. open jconsole and install qt addon,
load'pacman'
'update'jpkg''
'install'jpkg'qtide'
then exit and start jqt
You must use j802 (or tweak a j801) base library to get addons
for j802.
Вт, 03 июн 2014, Martin Neitzel написал(а):
> Here is just a short qtide installation summary for fellow source
> builders. Installation was a bit bumpy, perhaps someone else can
> benefit from the following notes.
>
> All this on our amd64 company server, running current "old-stable"
> Debian squeeze (6.0.9).
>
> Before, I built and ran jqt-801 fine with just three minor tweaks which
> have all been taken care of in j802 -- I really appreciate this!
>
>
>
> (A) In case you attempt to do what I did first, trying to upgrade "in place",
> like it usually is possible when tracking and building qtide sources.
>
> jqt will immediately segfault when jqt & shared lib are put into
> the old j801 bin dir.
>
> My gut feeling was perhaps only installing into a fresh j802 would be
> supported, so I proceeded at (B). It later turned out, however, that
> turning your j801 into a j802 via 801-jconsole:
>
> require 'pacman'
> 'update' jpkg ''
> 'upgrade' jpkg ''
>
> will do the job -- no more segfault and you are done.
>
>
> The more complicated way:
>
> (B) When you do a fresh clean install of j802 and drop the self-built
> jqt & shared lib into its bin directory, you'll get an ijx window
> but this fault during profile execution:
>
> |value error: wd
> | r=.r,LF,'Qt IDE: ', wd'version'
>
> This actually appears to relate closely to the segfault in (A), see the
> backtrace from (A) below.
>
> Trying to update packages via the "Tools->Packages" menu entry fails
> with:
>
> not found: /usr/local/j64-802/addons/ide/qt/pacman.ijs
> |file name error: script
> | 0!:0 y[4!:55<'y'
> |value error: runpacman_jpacman_
> | runpacman_jpacman_ 0
>
> Apparently there's some serious glue missing here which is currently
> only provided by doing a binary installation of qtide. This kind of
> defeats the entire point of building & installing something from source,
> but let's go this route for now and do the
>
> install 'qtide'
>
> from the jconsole. Voila, bin/{jqt,libjqt.so} But that won't fly,
> either:
>
> bin 216 > `pwd`/jqt
> "/usr/local/j64-802/bin/libjqt.so"
> "could not resolve: state_run:
>
> Cannot load library /usr/local/j64-802/bin/libjqt.so:
> (libQtDeclarative.so.4: cannot open shared object file: No such file or
> directory)"
>
> This is an incompatibility of the distributed qtide with the debian-squeeze
> Qt version.
>
> Copying over the self-built jqt binary and libjqt.so again fixes that
> and you'll end up with a running jqt.
>
>
> Lastly, because it hasn't been made explicit elsewhere before:
> The J core engine is still exactly the same:
>
> % md5sum j64*/bin/libj.so
> 122ee5617043e47453eab5276f61301c j64-602/bin/libj.so
> 3874a536b6fdc16364ca1ce16357f238 j64-701/bin/libj.so
> 3874a536b6fdc16364ca1ce16357f238 j64-801/bin/libj.so
> 3874a536b6fdc16364ca1ce16357f238 j64-802/bin/libj.so
>
>
> Martin
>
> Appendix: the backtrace. I manually inserted the "-g" flags into the
> (generated) Makefiles for getting the debug info. How is this properly
> done at the "qmake" level?
>
>
> #0 0x00007ffff5fc4ed1 in memcpy () from /lib/libc.so.6
> #1 0x00007ffff67e7580 in ?? () from /usr/lib/libstdc++.so.6
> #2 0x00007ffff67e77ab in std::basic_string<char, std::char_traits<char>,
> std::allocator<char> >::basic_string(char const*, unsigned long,
> std::allocator<char> const&) () from /usr/lib/libstdc++.so.6
> #3 0x00007ffff15b70e6 in Cmd::init (this=0x7ffff188fdc0,
> s=0xa74000 <Address 0xa74000 out of bounds>, slen=7358496) at
> wd/cmd.cpp:23
> #4 0x00007ffff1611348 in wd (s=0x8f9b00 "version", slen=7899168,
> res=@0x8f9200, len=@0x5) at wd/wd.cpp:147
> #5 0x00007fffeb9c5aa2 in docall () from /usr/local/j64-801/bin/libj.so
> #6 0x00007fffeb9c7899 in jtcdexec1 () from /usr/local/j64-801/bin/libj.so
> #7 0x00007fffeb9c81f4 in jtcd () from /usr/local/j64-801/bin/libj.so
> #8 0x00007fffeb9beb00 in secf2 () from /usr/local/j64-801/bin/libj.so
> #9 0x00007fffeb842323 in withl () from /usr/local/j64-801/bin/libj.so
> #10 0x00007fffeb83fded in jtdfs1 () from /usr/local/j64-801/bin/libj.so
> #11 0x00007fffeb890bca in jtunquote () from /usr/local/j64-801/bin/libj.so
> #12 0x00007fffeb83fded in jtdfs1 () from /usr/local/j64-801/bin/libj.so
> #13 0x00007fffeb883b64 in jtmonad () from /usr/local/j64-801/bin/libj.so
> #14 0x00007fffeb883669 in jtparsea () from /usr/local/j64-801/bin/libj.so
> #15 0x00007fffeb870e3e in jtparsex () from /usr/local/j64-801/bin/libj.so
> #16 0x00007fffeb86c750 in jtxdefn () from /usr/local/j64-801/bin/libj.so
> #17 0x00007fffeb862186 in rank1 () from /usr/local/j64-801/bin/libj.so
> #18 0x00007fffeb83fded in jtdfs1 () from /usr/local/j64-801/bin/libj.so
> #19 0x00007fffeb890bca in jtunquote () from /usr/local/j64-801/bin/libj.so
> #20 0x00007fffeb83fded in jtdfs1 () from /usr/local/j64-801/bin/libj.so
> #21 0x00007fffeb883b64 in jtmonad () from /usr/local/j64-801/bin/libj.so
> #22 0x00007fffeb883669 in jtparsea () from /usr/local/j64-801/bin/libj.so
> #23 0x00007fffeb870e3e in jtparsex () from /usr/local/j64-801/bin/libj.so
> #24 0x00007fffeb86c750 in jtxdefn () from /usr/local/j64-801/bin/libj.so
> #25 0x00007fffeb83fded in jtdfs1 () from /usr/local/j64-801/bin/libj.so
> #26 0x00007fffeb883b64 in jtmonad () from /usr/local/j64-801/bin/libj.so
> #27 0x00007fffeb883669 in jtparsea () from /usr/local/j64-801/bin/libj.so
> #28 0x00007fffeb883829 in jtparse () from /usr/local/j64-801/bin/libj.so
> #29 0x00007fffeb886697 in jtimmex () from /usr/local/j64-801/bin/libj.so
> #30 0x00007fffeb9d4842 in jtline () from /usr/local/j64-801/bin/libj.so
> #31 0x00007fffeb9d4b1e in jtlinf () from /usr/local/j64-801/bin/libj.so
> #32 0x00007fffeb83fded in jtdfs1 () from /usr/local/j64-801/bin/libj.so
> #33 0x00007fffeb883b64 in jtmonad () from /usr/local/j64-801/bin/libj.so
> #34 0x00007fffeb883669 in jtparsea () from /usr/local/j64-801/bin/libj.so
> #35 0x00007fffeb883829 in jtparse () from /usr/local/j64-801/bin/libj.so
> #36 0x00007fffeb886697 in jtimmex () from /usr/local/j64-801/bin/libj.so
> #37 0x00007fffeb9d4842 in jtline () from /usr/local/j64-801/bin/libj.so
> #38 0x00007fffeb9d4b1e in jtlinf () from /usr/local/j64-801/bin/libj.so
> #39 0x00007fffeb83fded in jtdfs1 () from /usr/local/j64-801/bin/libj.so
> #40 0x00007fffeb883b64 in jtmonad () from /usr/local/j64-801/bin/libj.so
> #41 0x00007fffeb883669 in jtparsea () from /usr/local/j64-801/bin/libj.so
> #42 0x00007fffeb870e3e in jtparsex () from /usr/local/j64-801/bin/libj.so
> #43 0x00007fffeb86c750 in jtxdefn () from /usr/local/j64-801/bin/libj.so
> #44 0x00007fffeb83fded in jtdfs1 () from /usr/local/j64-801/bin/libj.so
> #45 0x00007fffeb883b64 in jtmonad () from /usr/local/j64-801/bin/libj.so
> #46 0x00007fffeb883669 in jtparsea () from /usr/local/j64-801/bin/libj.so
> #47 0x00007fffeb883829 in jtparse () from /usr/local/j64-801/bin/libj.so
> #48 0x00007fffeb886697 in jtimmex () from /usr/local/j64-801/bin/libj.so
> #49 0x00007fffeb87babb in jdo () from /usr/local/j64-801/bin/libj.so
> #50 0x00007fffeb87bb6c in JDo () from /usr/local/j64-801/bin/libj.so
> #51 0x00007ffff155ad68 in jefirst (type=<value optimized out>,
> arg=<value optimized out>) at base/jsvr.cpp:471
> #52 0x00007ffff159cfa1 in Jcon::init (this=<value optimized out>, argc=1,
> argv=0x7fffffffe5f8) at base/svr.cpp:120
> #53 0x00007ffff159d9e1 in svr_init (argc=1, argv=0x7fffffffe5f8)
> at base/svr.cpp:225
> #54 0x00007ffff1593812 in state_init (argc=1, argv=0x7fffffffe5f8)
> at base/state.cpp:388
> #55 0x00007ffff15938d3 in state_run (argc=1, argv=0x7fffffffe5f8,
> lib=<value optimized out>, fhs=<value optimized out>) at
> base/state.cpp:456
> #56 0x0000000000401428 in main (argc=1, argv=0x7fffffffe5f8) at main.cpp:60
>
>
> ----------------------------------------------------------------------
> For information about J forums see http://www.jsoftware.com/forums.htm
--
regards,
====================================================
GPG key 1024D/4434BAB3 2008-08-24
gpg --keyserver subkeys.pgp.net --recv-keys 4434BAB3
gpg --keyserver subkeys.pgp.net --armor --export 4434BAB3
----------------------------------------------------------------------
For information about J forums see http://www.jsoftware.com/forums.htm
