The obvious problem here is trying to install your own J802 binary in J801.
You should install a normal J802 system first, then try your own binary in it. On Wed, Jun 4, 2014 at 12:24 AM, <[email protected]> wrote: > Here is just a short qtide installation summary for fellow source > builders. Installation was a bit bumpy, perhaps someone else can > benefit from the following notes. > > All this on our amd64 company server, running current "old-stable" > Debian squeeze (6.0.9). > > Before, I built and ran jqt-801 fine with just three minor tweaks which > have all been taken care of in j802 -- I really appreciate this! > > > > (A) In case you attempt to do what I did first, trying to upgrade "in > place", > like it usually is possible when tracking and building qtide sources. > > jqt will immediately segfault when jqt & shared lib are put into > the old j801 bin dir. > > My gut feeling was perhaps only installing into a fresh j802 would be > supported, so I proceeded at (B). It later turned out, however, that > turning your j801 into a j802 via 801-jconsole: > > require 'pacman' > 'update' jpkg '' > 'upgrade' jpkg '' > > will do the job -- no more segfault and you are done. > > > The more complicated way: > > (B) When you do a fresh clean install of j802 and drop the self-built > jqt & shared lib into its bin directory, you'll get an ijx window > but this fault during profile execution: > > |value error: wd > | r=.r,LF,'Qt IDE: ', wd'version' > > This actually appears to relate closely to the segfault in (A), see the > backtrace from (A) below. > > Trying to update packages via the "Tools->Packages" menu entry fails > with: > > not found: /usr/local/j64-802/addons/ide/qt/pacman.ijs > |file name error: script > | 0!:0 y[4!:55<'y' > |value error: runpacman_jpacman_ > | runpacman_jpacman_ 0 > > Apparently there's some serious glue missing here which is currently > only provided by doing a binary installation of qtide. This kind of > defeats the entire point of building & installing something from source, > but let's go this route for now and do the > > install 'qtide' > > from the jconsole. Voila, bin/{jqt,libjqt.so} But that won't fly, > either: > > bin 216 > `pwd`/jqt > "/usr/local/j64-802/bin/libjqt.so" > "could not resolve: state_run: > > Cannot load library /usr/local/j64-802/bin/libjqt.so: > (libQtDeclarative.so.4: cannot open shared object file: No such file or > directory)" > > This is an incompatibility of the distributed qtide with the debian-squeeze > Qt version. > > Copying over the self-built jqt binary and libjqt.so again fixes that > and you'll end up with a running jqt. > > > Lastly, because it hasn't been made explicit elsewhere before: > The J core engine is still exactly the same: > > % md5sum j64*/bin/libj.so > 122ee5617043e47453eab5276f61301c j64-602/bin/libj.so > 3874a536b6fdc16364ca1ce16357f238 j64-701/bin/libj.so > 3874a536b6fdc16364ca1ce16357f238 j64-801/bin/libj.so > 3874a536b6fdc16364ca1ce16357f238 j64-802/bin/libj.so > > > Martin > > Appendix: the backtrace. I manually inserted the "-g" flags into the > (generated) Makefiles for getting the debug info. How is this properly > done at the "qmake" level? > > > #0 0x00007ffff5fc4ed1 in memcpy () from /lib/libc.so.6 > #1 0x00007ffff67e7580 in ?? () from /usr/lib/libstdc++.so.6 > #2 0x00007ffff67e77ab in std::basic_string<char, std::char_traits<char>, > std::allocator<char> >::basic_string(char const*, unsigned long, > std::allocator<char> const&) () from /usr/lib/libstdc++.so.6 > #3 0x00007ffff15b70e6 in Cmd::init (this=0x7ffff188fdc0, > s=0xa74000 <Address 0xa74000 out of bounds>, slen=7358496) at > wd/cmd.cpp:23 > #4 0x00007ffff1611348 in wd (s=0x8f9b00 "version", slen=7899168, > res=@0x8f9200, len=@0x5) at wd/wd.cpp:147 > #5 0x00007fffeb9c5aa2 in docall () from /usr/local/j64-801/bin/libj.so > #6 0x00007fffeb9c7899 in jtcdexec1 () from /usr/local/j64-801/bin/libj.so > #7 0x00007fffeb9c81f4 in jtcd () from /usr/local/j64-801/bin/libj.so > #8 0x00007fffeb9beb00 in secf2 () from /usr/local/j64-801/bin/libj.so > #9 0x00007fffeb842323 in withl () from /usr/local/j64-801/bin/libj.so > #10 0x00007fffeb83fded in jtdfs1 () from /usr/local/j64-801/bin/libj.so > #11 0x00007fffeb890bca in jtunquote () from /usr/local/j64-801/bin/libj.so > #12 0x00007fffeb83fded in jtdfs1 () from /usr/local/j64-801/bin/libj.so > #13 0x00007fffeb883b64 in jtmonad () from /usr/local/j64-801/bin/libj.so > #14 0x00007fffeb883669 in jtparsea () from /usr/local/j64-801/bin/libj.so > #15 0x00007fffeb870e3e in jtparsex () from /usr/local/j64-801/bin/libj.so > #16 0x00007fffeb86c750 in jtxdefn () from /usr/local/j64-801/bin/libj.so > #17 0x00007fffeb862186 in rank1 () from /usr/local/j64-801/bin/libj.so > #18 0x00007fffeb83fded in jtdfs1 () from /usr/local/j64-801/bin/libj.so > #19 0x00007fffeb890bca in jtunquote () from /usr/local/j64-801/bin/libj.so > #20 0x00007fffeb83fded in jtdfs1 () from /usr/local/j64-801/bin/libj.so > #21 0x00007fffeb883b64 in jtmonad () from /usr/local/j64-801/bin/libj.so > #22 0x00007fffeb883669 in jtparsea () from /usr/local/j64-801/bin/libj.so > #23 0x00007fffeb870e3e in jtparsex () from /usr/local/j64-801/bin/libj.so > #24 0x00007fffeb86c750 in jtxdefn () from /usr/local/j64-801/bin/libj.so > #25 0x00007fffeb83fded in jtdfs1 () from /usr/local/j64-801/bin/libj.so > #26 0x00007fffeb883b64 in jtmonad () from /usr/local/j64-801/bin/libj.so > #27 0x00007fffeb883669 in jtparsea () from /usr/local/j64-801/bin/libj.so > #28 0x00007fffeb883829 in jtparse () from /usr/local/j64-801/bin/libj.so > #29 0x00007fffeb886697 in jtimmex () from /usr/local/j64-801/bin/libj.so > #30 0x00007fffeb9d4842 in jtline () from /usr/local/j64-801/bin/libj.so > #31 0x00007fffeb9d4b1e in jtlinf () from /usr/local/j64-801/bin/libj.so > #32 0x00007fffeb83fded in jtdfs1 () from /usr/local/j64-801/bin/libj.so > #33 0x00007fffeb883b64 in jtmonad () from /usr/local/j64-801/bin/libj.so > #34 0x00007fffeb883669 in jtparsea () from /usr/local/j64-801/bin/libj.so > #35 0x00007fffeb883829 in jtparse () from /usr/local/j64-801/bin/libj.so > #36 0x00007fffeb886697 in jtimmex () from /usr/local/j64-801/bin/libj.so > #37 0x00007fffeb9d4842 in jtline () from /usr/local/j64-801/bin/libj.so > #38 0x00007fffeb9d4b1e in jtlinf () from /usr/local/j64-801/bin/libj.so > #39 0x00007fffeb83fded in jtdfs1 () from /usr/local/j64-801/bin/libj.so > #40 0x00007fffeb883b64 in jtmonad () from /usr/local/j64-801/bin/libj.so > #41 0x00007fffeb883669 in jtparsea () from /usr/local/j64-801/bin/libj.so > #42 0x00007fffeb870e3e in jtparsex () from /usr/local/j64-801/bin/libj.so > #43 0x00007fffeb86c750 in jtxdefn () from /usr/local/j64-801/bin/libj.so > #44 0x00007fffeb83fded in jtdfs1 () from /usr/local/j64-801/bin/libj.so > #45 0x00007fffeb883b64 in jtmonad () from /usr/local/j64-801/bin/libj.so > #46 0x00007fffeb883669 in jtparsea () from /usr/local/j64-801/bin/libj.so > #47 0x00007fffeb883829 in jtparse () from /usr/local/j64-801/bin/libj.so > #48 0x00007fffeb886697 in jtimmex () from /usr/local/j64-801/bin/libj.so > #49 0x00007fffeb87babb in jdo () from /usr/local/j64-801/bin/libj.so > #50 0x00007fffeb87bb6c in JDo () from /usr/local/j64-801/bin/libj.so > #51 0x00007ffff155ad68 in jefirst (type=<value optimized out>, > arg=<value optimized out>) at base/jsvr.cpp:471 > #52 0x00007ffff159cfa1 in Jcon::init (this=<value optimized out>, argc=1, > argv=0x7fffffffe5f8) at base/svr.cpp:120 > #53 0x00007ffff159d9e1 in svr_init (argc=1, argv=0x7fffffffe5f8) > at base/svr.cpp:225 > #54 0x00007ffff1593812 in state_init (argc=1, argv=0x7fffffffe5f8) > at base/state.cpp:388 > #55 0x00007ffff15938d3 in state_run (argc=1, argv=0x7fffffffe5f8, > lib=<value optimized out>, fhs=<value optimized out>) at > base/state.cpp:456 > #56 0x0000000000401428 in main (argc=1, argv=0x7fffffffe5f8) at main.cpp:60 > > > ---------------------------------------------------------------------- > For information about J forums see http://www.jsoftware.com/forums.htm > ---------------------------------------------------------------------- For information about J forums see http://www.jsoftware.com/forums.htm
