You are correct that I was away the last several days. My immediate response
is that there were no gl2 changes between the j and k betas. Your tests
indicate otherwise and I'm sure you're right. I'll try to dig into
differences and notes for an answer but it may take a few days. Perhaps you
could confirm that the plot demos work and Oleg's simple example works for
you in the k beta. Just had a thought that perhaps some obsolete command was
cleaned out in the k beta that previously had no effect and now causes an
error. Please verify that your paint verb is running when it should run and
that it runs to the end without an error (perhaps with smoutput at start and
end).
----- Original Message -----
From: "Henry Rich" <[EMAIL PROTECTED]>
To: "'Beta forum'" <[email protected]>
Sent: Tuesday, April 18, 2006 9:12 AM
Subject: RE: [Jbeta] gl2 Graphics gone in kbeta
I replaced glshow and glshowx a long time ago as part of the
initial conversion to J6.
I get correct display on the jbeta.
The new kbeta doesn't draw anything except white. Something
must have changed between the two betas, but I can't find
a description of what.
Henry rich
-----Original Message-----
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of bill lam
Sent: Tuesday, April 18, 2006 6:33 AM
To: Beta forum
Subject: Re: [Jbeta] gl2 Graphics gone in kbeta
I checked glshow and glshowx is dropped in beta j, it have to
replaced by
glpaint. Does this solve your problem?
Henry Rich wrote:
> I just backed out the new J version and it works OK,
> so something has changed in the kbeta.
----------------------------------------------------------------------
For information about J forums see
http://www.jsoftware.com/forums.htm
----------------------------------------------------------------------
For information about J forums see http://www.jsoftware.com/forums.htm
----------------------------------------------------------------------
For information about J forums see http://www.jsoftware.com/forums.htm
