I'm working on a multiroom system where the SBR's are mounted together with an amplifier in the ceiling to run a pair of ceiling speakers. I wanted to manualy configure the SBR's so I know where they are on the network at anytime. They have a hard wired ethernet connection back to the switch. Having done a few Duet's now I find the whole configuration process hit or miss and am supprised that squeezecenter based configuration was not included from the outset.
Anyway I have found Robin's Net-UDAP most useful. I'm not a whizz on programming or software and thought it might help a few to detail some of the settings and thier options. I did not find much on the web but might not have seen the wood for the trees. This is what I have found in relation to static addressing... UDAP [1] (squeezebox 1601ba)> list bridging: 1 hostname: SBRBETA (name of SBR in squeezecenter) interface: 0 (0=Wireless 1=LAN) lan_gateway: 192.168.0.1 lan_ip_mode: 0 (0=Fixed IP, 1=DHCP) lan_network_address: 192.168.0.223 lan_subnet_mask: 255.255.255.0 primary_dns: 192.168.0.1 secondary_dns: 0.0.0.0 server_address: 0.0.0.0 (?? Can be left blank) squeezecenter_address: 192.168.0.222 (Address of Squeezecenter server) squeezecenter_name: slimnas (Can be left blank) wireless_SSID: my_ssid wireless_channel: 6 wireless_keylen: 0 wireless_mode: 0 wireless_region_id: 4 wireless_wep_key_0: wireless_wep_key_1: wireless_wep_key_2: wireless_wep_key_3: wireless_wep_on: 0 wireless_wpa_cipher: 2 wireless_wpa_enabled: 1 wireless_wpa_mode: 1 wireless_wpa_psk: my_wpa_psk UDAP [1] (squeezebox 1601ba)> I guess it would help if others could help with the meaning of the wireless options. -- garym999 ------------------------------------------------------------------------ garym999's Profile: http://forums.slimdevices.com/member.php?userid=4943 View this thread: http://forums.slimdevices.com/showthread.php?t=43722 _______________________________________________ beta mailing list [email protected] http://lists.slimdevices.com/lists/listinfo/beta
