JJZolx;657459 Wrote: > I have an SB2 in my kitchen and a Boom IR remote stuck to the > refrigerator. I just noticed that if I attempt to hold either the > volume up or down on the remote, it only moves the volume by one unit, > then immediately goes back to the Now Playing screensaver. > > Tested it also with an SB3 and I see the same thing. The Boom remote > works fine with a Boom, and an older full-sized remote works correctly > on the SB2 and SB3. The firmware on the SB2 & 3 is version 137, and I > get the same behavior connected to either SBS 7.5.6 or 7.6.2.
It's always been this way... The remotes send different codes for the devices you mention iirc. -- Phil Leigh You want to see the signal path BEFORE it gets onto a CD/vinyl...it ain't what you'd call minimal... Touch(wired/XP) - Audiolense 3.3/2.0+INGUZ DRC - MF M1 DAC - Linn 5103 - full Aktiv 5.1 system (6x LK140's, ESPEK/TRIKAN/KATAN/SEIZMIK 10.5), Pekin Tuner, Townsend Supertweeters, Blue Jeans Belden Digital,Kimber 8TC Speaker & Chord Signature Plus Interconnect cables Stax4070+SRM7/II phones Kitchen Boom, Outdoors: SB Radio, Harmony One remote for everything. ------------------------------------------------------------------------ Phil Leigh's Profile: http://forums.slimdevices.com/member.php?userid=85 View this thread: http://forums.slimdevices.com/showthread.php?t=90354 _______________________________________________ beta mailing list [email protected] http://lists.slimdevices.com/mailman/listinfo/beta
