Depends on the model. The early Shimanos actually had higher drag with
the lights turned off than with the lights on. They've now got that
straightened out.

On Aug 31, 1:32 pm, GeorgeS <[EMAIL PROTECTED]> wrote:
> I have no experience with generators but I recently acquired a bike
> equipped with a Shimano generator and an LED light.  Seems to work
> great on the few night rides I've taken.  Question: does the generator
> produce drag when the light is not on?   Another question: standard
> maintenance?  Lots of wet weather where I live (New Orleans)
> GeorgeS
>
> On Aug 29, 4:55 pm, Tim Smith <[EMAIL PROTECTED]> wrote:
>
> > cheesy wrote:
> > >I've run the Soubitez models, with Union halogen headlights, for
> > >years. The one on my brevet bike has been in use since 1990. I have a
> > >friction shift lever mounted on the seat tube to engage and disengage
> > >the unit on this bike.
>
> > >Yes, you can run full fenders.
>
> > Agree. I ran the same set-up for a few years back in the early 1980s.
> > At the time it was by far the most reliable and brightest set-up for
> > lights available. I ran it in Illinois, and did some winter riding.
> > But for brevets I switched back to batteries powering the Union.
> > Different bike, with not enough clearance at the chain stays to mount
> > the generator easily.
>
> > These days, I wouldn't run anything but a SON (or maybe Shimano) hub
> > and an LED light. Pricey, but ultra-reliable. Well, if I had a beater
> > bike for winter commuting I might think about a bottle generator.
> > Batteries? No way, Jose. (Except for LED taillights, where they last.)
--~--~---------~--~----~------------~-------~--~----~
You received this message because you are subscribed to the Google Groups 
"Bicycle Lifestyle" group.
To post to this group, send email to [email protected]
To unsubscribe from this group, send email to [EMAIL PROTECTED]
For more options, visit this group at 
http://groups.google.com/group/bicyclelifestyle?hl=en
-~----------~----~----~----~------~----~------~--~---

Reply via email to