Generally yes. Measure the outside locknut dimension. Measure the thickness of your dropouts. You will want to have a replacement axle that is the proper length to be wide enough to maintain your outside locknut dimension and about 1/2 to 3/4 of the thickness of the dropout on each side.
Best to begin by overhauling your hubs. Bring your existing axle, measurements, and cones to your local reputable bike shop. Explain what it is you are attempting to do and they should be able to match you up with a replacement axle of the proper diameter and thread pitch. Replace your bearings in the process too. Good luck and let us know how it goes. On Oct 7, 6:51 pm, TomMarchand <[EMAIL PROTECTED]> wrote: > Hi, > > Is it possible to retrofit solid axle hubs with a QR system? --~--~---------~--~----~------------~-------~--~----~ You received this message because you are subscribed to the Google Groups "Bicycle Lifestyle" group. To post to this group, send email to [email protected] To unsubscribe from this group, send email to [EMAIL PROTECTED] For more options, visit this group at http://groups.google.com/group/bicyclelifestyle?hl=en -~----------~----~----~----~------~----~------~--~---
