On Thu, 2010-07-08 at 07:34 -0400, Alan Clegg wrote: > On 7/8/2010 7:26 AM, John Horne wrote: > > > However, when checking the SOA serial number of our reverse zone we are > > seeing different values depending on whether we are inside or outside of > > the campus. This zone is maintained internally by MS Windows servers, > > and so our main servers (141.163.1.250 and 141.163.177.1) act as slaves. > > [..] > > > Both views use the same zone file (which currently contains 3330257 as > > the serial number), and the zone is configured to use a single master. > > If I use rndc to reload the zone in both views, then nothing changes. If > > I stop and restart the whole named service, then both views have the > > same serial number. Why doesn't a reload cause the zone serial number to > > be updated from the file copy of the zone? > > You need to specify different "file" locations for each of the slaved > zones (even if the data is the same) in each view. > Does that apply for master zones which are common (i.e. the same data) to both views as well?
John. -- John Horne, University of Plymouth, UK Tel: +44 (0)1752 587287 Fax: +44 (0)1752 587001 _______________________________________________ bind-users mailing list [email protected] https://lists.isc.org/mailman/listinfo/bind-users
