On Feb 14, 2011, at 8:31 PM, Terry. wrote:
> check your configure especially for:
>
> * notify/ also-notify/ allow-notify
> * allow-transfer
> * does slave named have the permittion to write to data dir?
yes , salve can write.
slave options;
allow-transfer { 10.1.1.2; };
allow-notify {10.1.1.2};
transfer-format many-answers;
master options;
allow-transfer { 10.135.1.3; };
is that correct ?
-j
>
> Regards.
>
> 2011/2/15 donovan jeffrey j <[email protected]>:
>> Greetings
>>
>> I have a new slave server. I edited my master, incremented the serial number
>> and reloaded named. The master is fine, and contains the new entry but the
>> slaves are still running the previous entries.
>>
>> what is the basic operation of updating a slave ?
>>
>> I reloaded the zone with rndc and the slave pulled the zone. The serial
>> number was incremented on the slave, but the old entry's were still there.
>> I checked the forward and reverse records, and nothing had changed except
>> the serial number. So I deleted the slave files, and pulled the zone again,
>> and kick started named, everything works fine.
>> I highly doubt my procedure was the correct way to do it.
>>
>> can someone explain to me the proper work flow for updating records on
>> slaves ?
>>
>> TIA
>>
>> -j
>>
>> _______________________________________________
>> bind-users mailing list
>> [email protected]
>> https://lists.isc.org/mailman/listinfo/bind-users
>>
>
>
>
> --
> Free SmartDNS Hosting:
> http://DNSbed.com/
_______________________________________________
bind-users mailing list
[email protected]
https://lists.isc.org/mailman/listinfo/bind-users
