On Feb 14, 2011, at 8:31 PM, Terry. wrote: > check your configure especially for: > > * notify/ also-notify/ allow-notify
Thanks you all who replied, I needed the allow notify. -j > * allow-transfer > * does slave named have the permittion to write to data dir? > > Regards. > > 2011/2/15 donovan jeffrey j <dono...@beth.k12.pa.us>: >> Greetings >> >> I have a new slave server. I edited my master, incremented the serial number >> and reloaded named. The master is fine, and contains the new entry but the >> slaves are still running the previous entries. >> >> what is the basic operation of updating a slave ? >> >> I reloaded the zone with rndc and the slave pulled the zone. The serial >> number was incremented on the slave, but the old entry's were still there. >> I checked the forward and reverse records, and nothing had changed except >> the serial number. So I deleted the slave files, and pulled the zone again, >> and kick started named, everything works fine. >> I highly doubt my procedure was the correct way to do it. >> >> can someone explain to me the proper work flow for updating records on >> slaves ? >> >> TIA >> >> -j >> >> _______________________________________________ >> bind-users mailing list >> bind-users@lists.isc.org >> https://lists.isc.org/mailman/listinfo/bind-users >> > > > > -- > Free SmartDNS Hosting: > http://DNSbed.com/ _______________________________________________ bind-users mailing list bind-users@lists.isc.org https://lists.isc.org/mailman/listinfo/bind-users
