Hi Ondřej
That could work for eliminating the caching delay when the VPN comes up.
I'd just have to get that into the VPN config so people didn't have to
do it manually.
Is there any way to stop the recursion for that domain happening in the
first place though?
Thanks, Chris
On 15/05/2020 13:34, Ondřej Surý wrote:
Hi Chris,
when your vpn comes up, you need to issue:
rndc flushtree <domain>
command to the BIND 9 instance.
Ondrej
--
Ondřej Surý
ond...@isc.org
On 15 May 2020, at 14:16, Chris Palmer via bind-users
<bind-users@lists.isc.org> wrote:
There is much discussion about recursion but I can't find anything that matches
this use case...
- In-house Bind-9.11.14 server, master for some local zones, recursion enabled;
not accessible from external networks
- Two views for in-house networks
- Intermittent VPN access from in-house network to another private network that
is master for DNS zone x.y.zzz; this network is not publicly reachable
- Need queries from one of our views for x.y.zzz to be sent to the static
address for the x.y.zzz server that is only reachable via the VPN
- When the VPN is not connected, need the lookup on to fail/timeout rather than
go through the recursion path
- When the VPN is again connected need lookups to succeed without undue delay.
Within the required view I have tried a zone with type forward (specifying
forwarders and forward only), and also a zone of type static-stub (specifying
server-addresses). Both work fine when the VPN is up. Both have two problems
though when the VPN is disconnected:
(a) the queries are recursed and an NXDOMAIN response cached.
(b) When the VPN comes back up the cached NXDOMAIN is served until it
expires.
I have been trying to force a SERVFAIL when the specified servers for that
domain are unreachable, rather than recursing. And presumably that would then
cause the queries to quickly flow to the required servers once they are
reachable again. Is that possible, or is there another approach to this problem?
Many thanks, Chris
_______________________________________________
Please visit https://lists.isc.org/mailman/listinfo/bind-users to unsubscribe
from this list
ISC funds the development of this software with paid support subscriptions.
Contact us at https://www.isc.org/contact/ for more information.
bind-users mailing list
bind-users@lists.isc.org
https://lists.isc.org/mailman/listinfo/bind-users
_______________________________________________
Please visit https://lists.isc.org/mailman/listinfo/bind-users to unsubscribe
from this list
ISC funds the development of this software with paid support subscriptions.
Contact us at https://www.isc.org/contact/ for more information.
bind-users mailing list
bind-users@lists.isc.org
https://lists.isc.org/mailman/listinfo/bind-users