Hi all, I want an inexpensive way to connect a hydrophone to a PC such as to the RCA mic jack of a laptop or a PCMCIA card. I will then write the software to read the audio-in port. I want to read frequencies between 1 Hz and 100 kHz and use my own software to read the input port. I already have the FFT and other signal processing completed.
Does this make sense? For example, isn't the typical mic port build for the frequencies of the human audio range or can it accept a wider range? If I need a PCMCIA card or some other interface for the A/D then which one would you recommend? Which hydrophone(s) do you recommend? I am planning to release the software with an open-source licence. The prototype is currently at http://leafy.dev.java.net/ and at http://sf.net/projects/c2h/ in the *file* sections. Thank you very much. serge masse montreal, canada ===== Serge Leafy API: http://leafy.dev.java.net/ LeafySeaDragon: http://sourceforge.net/projects/c2h/ Simplequestion: http://questionnaire.dev.java.net/ "The wireless telegraph is not difficult to understand. The ordinary telegraph is like a very long cat. You pull the tail in New York, and it meows in Los Angeles. The wireless is the same, only without the cat." - Albert Einstein
