Hi Samuela,
We are kind of having a similar issue with the metagenomeSeq package. I was
wondering if you were able to figure out the cause for the issue in the package?
For us, the package fails during the build process `devtools::build()` on a
code block in the vignette that uses gss. If i run the same exact code block in
the interactive R-console on R-devel, things run normally. everything else
finishes without errors, `devtools::install()` and `devtools::check()` except
for the build.
Thank you,
Jayaram
________________________________________
From: Bioc-devel <bioc-devel-boun...@r-project.org> on behalf of
bioc-devel-requ...@r-project.org <bioc-devel-requ...@r-project.org>
Sent: Wednesday, April 3, 2019 6:03 AM
To: bioc-devel@r-project.org
Subject: Bioc-devel Digest, Vol 181, Issue 2
Send Bioc-devel mailing list submissions to
bioc-devel@r-project.org
To subscribe or unsubscribe via the World Wide Web, visit
https://stat.ethz.ch/mailman/listinfo/bioc-devel
or, via email, send a message with subject or body 'help' to
bioc-devel-requ...@r-project.org
You can reach the person managing the list at
bioc-devel-ow...@r-project.org
When replying, please edit your Subject line so it is more specific
than "Re: Contents of Bioc-devel digest..."
Today's Topics:
1. Remaining windows build error (Erik Fasterius)
2. Re: Remaining windows build error (Shepherd, Lori)
3. Re: Error when building BgeeCall package on Mac OS (Martin Morgan)
4. error in bumphunter unit test (Samuela Pollack)
5. Re: error in bumphunter unit test (Shepherd, Lori)
6. Bioconductor 3.9 contributed annotation package deadline
(Van Twisk, Daniel)
7. Vignette Latex error (Karl Stamm)
8. Re: Call for collaborators/advice (Aaron Lun)
9. How to define S4 method for class from another package
(Stephen Martin Pederson)
----------------------------------------------------------------------
Message: 1
Date: Tue, 2 Apr 2019 10:11:50 +0000
From: Erik Fasterius <erik.faster...@outlook.com>
To: "bioc-devel@r-project.org" <bioc-devel@r-project.org>
Subject: [Bioc-devel] Remaining windows build error
Message-ID: <8d6a7afb-6bdf-4157-a39e-03bb54a00...@outlook.com>
Content-Type: text/plain; charset="utf-8"
I am still getting a Windows build error in my seqCAT package. I thought this
was a problem with VariantAnnotation after an update, which also seemed to be
the case after communication with Valerie Obenchain. My package was apparently
not the only package affected by this, and I was told the problem was being
worked on. What is the status on this?
I would very much like my package to successfully build on all platforms (OS X
and Linux are fine) before the deadline for the next Bioconductor release. Is
there anything I can do here?
Erik
[[alternative HTML version deleted]]
------------------------------
Message: 2
Date: Tue, 2 Apr 2019 12:10:49 +0000
From: "Shepherd, Lori" <lori.sheph...@roswellpark.org>
To: Erik Fasterius <erik.faster...@outlook.com>,
"bioc-devel@r-project.org" <bioc-devel@r-project.org>
Subject: Re: [Bioc-devel] Remaining windows build error
Message-ID:
<bn8pr12mb31889da4b5d9ff13dd4f1b0ff9...@bn8pr12mb3188.namprd12.prod.outlook.com>
Content-Type: text/plain; charset="utf-8"
Thank you. We are still looking into the issue and hope to have it resolved
soon.
Lori Shepherd
Bioconductor Core Team
Roswell Park Cancer Institute
Department of Biostatistics & Bioinformatics
Elm & Carlton Streets
Buffalo, New York 14263
________________________________
From: Bioc-devel <bioc-devel-boun...@r-project.org> on behalf of Erik Fasterius
<erik.faster...@outlook.com>
Sent: Tuesday, April 2, 2019 6:11:50 AM
To: bioc-devel@r-project.org
Subject: [Bioc-devel] Remaining windows build error
I am still getting a Windows build error in my seqCAT package. I thought this
was a problem with VariantAnnotation after an update, which also seemed to be
the case after communication with Valerie Obenchain. My package was apparently
not the only package affected by this, and I was told the problem was being
worked on. What is the status on this?
I would very much like my package to successfully build on all platforms (OS X
and Linux are fine) before the deadline for the next Bioconductor release. Is
there anything I can do here?
Erik
[[alternative HTML version deleted]]
_______________________________________________
Bioc-devel@r-project.org mailing list
https://stat.ethz.ch/mailman/listinfo/bioc-devel
This email message may contain legally privileged and/or confidential
information. If you are not the intended recipient(s), or the employee or
agent responsible for the delivery of this message to the intended
recipient(s), you are hereby notified that any disclosure, copying,
distribution, or use of this email message is prohibited. If you have received
this message in error, please notify the sender immediately by e-mail and
delete this email message from your computer. Thank you.
[[alternative HTML version deleted]]
------------------------------
Message: 3
Date: Tue, 2 Apr 2019 13:21:35 +0000
From: Martin Morgan <mtmorgan.b...@gmail.com>
To: Julien Wollbrett <julien.wollbrett@sib.swiss>,
"bioc-devel@r-project.org" <bioc-devel@r-project.org>
Subject: Re: [Bioc-devel] Error when building BgeeCall package on Mac
OS
Message-ID:
<mn2pr05mb649691b379e6e69ebfb08e49f9...@mn2pr05mb6496.namprd05.prod.outlook.com>
Content-Type: text/plain; charset="utf-8"
I added a response to your issue at
https://github.com/Bioconductor/Contributions/issues/1002#issuecomment-478991986
encouraging you (again) to avoid installing software on the user system; there
are basic problems with this approach, and the correct solution is to list
kallisto as a SystemDependency: in your DESCRIPTION file.
Maritn
On 4/2/19, 4:17 AM, "Bioc-devel on behalf of Julien Wollbrett"
<bioc-devel-boun...@r-project.org on behalf of julien.wollbrett@sib.swiss>
wrote:
Hello,
My package (called BgeeCall) is under review and passed R CMD Build and
R CMD Check for Linux and windows.
I still have an error on Mac. I tried to reproduce it using different
versions of R (3.5 and 3.6) and different OS
versions (Sierra and El Capitan). I tried on 5 different computers but
still not able to reproduce this error.
Does anyone have any idea on the origin of this error ? What should I
try to do to solve it?
dyld: Library not loaded: @rpath/libz.1.dylib
Referenced from:
/private/var/folders/gh/37kcv9bj20v2qnpgxq14hh1c0000gq/T/Rtmp7eA44u/Rbuild1406e51fd6e7f/BgeeCall/kallisto/kallisto
Reason: image not found
Will run kallisto using this command line :
/private/var/folders/gh/37kcv9bj20v2qnpgxq14hh1c0000gq/T/Rtmp7eA44u/Rbuild1406e51fd6e7f/BgeeCall/kallisto/kallisto
quant -i
/private/var/folders/gh/37kcv9bj20v2qnpgxq14hh1c0000gq/T/Rtmp7eA44u/Rbuild1406e51fd6e7f/BgeeCall/intergenic_0.1/6239/kallisto/transcriptome_WBcel235/transcriptome.idx
-o
/private/var/folders/gh/37kcv9bj20v2qnpgxq14hh1c0000gq/T/Rtmp7eA44u/Rbuild1406e51fd6e7f/BgeeCall/intergenic_0.1/6239/kallisto/transcriptome_WBcel235/annotation_WBcel235_84/SRX099901_subset
-t 1 --single -l 180 -s 30 --bias
/private/var/folders/gh/37kcv9bj20v2qnpgxq14hh1c0000gq/T/Rtmp7eA44u/Rinst1406e55617de6/BgeeCall/extdata/SRX099901_subset/SRR350955_subset.fastq.gz
dyld: Library not loaded: @rpath/libz.1.dylib
Referenced from:
/private/var/folders/gh/37kcv9bj20v2qnpgxq14hh1c0000gq/T/Rtmp7eA44u/Rbuild1406e51fd6e7f/BgeeCall/kallisto/kallisto
Reason: image not found
You can access to the submission issue here :
https://github.com/Bioconductor/Contributions/issues/1002
Thank you for your answers.
Julien Wollbrett
[[alternative HTML version deleted]]
_______________________________________________
Bioc-devel@r-project.org mailing list
https://stat.ethz.ch/mailman/listinfo/bioc-devel
------------------------------
Message: 4
Date: Tue, 2 Apr 2019 10:17:57 -0400
From: Samuela Pollack <spoll...@jimmy.harvard.edu>
To: Bioc-devel <bioc-devel@r-project.org>
Subject: [Bioc-devel] error in bumphunter unit test
Message-ID: <16dff631-da1e-354b-727d-263ddb306...@jimmy.harvard.edu>
Content-Type: text/plain; charset="utf-8"; Format="flowed"
Dear Bioconductor,
Our bumphunter package is failing its unit tests fairly spectacularly:
the pval algorithm seems to be returning a data frame full of zeroes.
Unfortunately, I have not been able to reproduce this behavior. I have
instantiated an EC2 instance with the devel AMI, updated all the
packages, installed bumphunter and its dependencies, and run the unit
tests without errors.
My sessionInfo indicates all R dependencies are identical to the
snapshot on the devel build report. However, two things may be causing
the disparity in results:
(i) bumphunter uses 'doParallel' and 'foreach' at the point that it is
failing; is it possible for me to confirm that I am using the same
version of these as the build system used. (Note: we are failing even
when doParallel defaults to sequential execution, so the low-level
interface does not seem to be relevant.)
(ii) The devel AMI is running R 3.6 release 75543 and the build system
is running release 76205. Could this be the discrepancy we're looking
for? We are reluctant to reinstall all of R+Bioc unless it looks relevant.
Any other suggestions would be very helpful. We haven't touched the
package in months and are totally buffaloed why it has decided to fail
just days before the new release.
thanks in advance for any advice you can offer,
- Sam
------------------------------
Message: 5
Date: Tue, 2 Apr 2019 15:06:36 +0000
From: "Shepherd, Lori" <lori.sheph...@roswellpark.org>
To: Samuela Pollack <spoll...@jimmy.harvard.edu>, Bioc-devel
<bioc-devel@r-project.org>
Subject: Re: [Bioc-devel] error in bumphunter unit test
Message-ID:
<bn8pr12mb31889b491b751ff6b7074c58f9...@bn8pr12mb3188.namprd12.prod.outlook.com>
Content-Type: text/plain; charset="utf-8"
The version of R devel being used could be significant. There have been a
number of changes in R devel that could be the culprit.
Could be completely unrelated but one such example is the random number
generator updates:
https://stat.ethz.ch/pipermail/bioc-devel/2019-March/014776.html
Please make sure you are using the most recent R-devel.
The version of packages being utilized on the build system will be the versions
listed in the build report page:
http://bioconductor.org/checkResults/3.9/bioc-LATEST/
You could always do a BiocManager::valid() to test a valid install and if any
packages should be updated.
Are you using a bioconductor provided devel docker images? If you are, the
devel docker image are updated weekly. You might want to pull the latest
version. A locally pull docker image does not update automatically.
Lori Shepherd
Bioconductor Core Team
Roswell Park Cancer Institute
Department of Biostatistics & Bioinformatics
Elm & Carlton Streets
Buffalo, New York 14263
________________________________
From: Bioc-devel <bioc-devel-boun...@r-project.org> on behalf of Samuela
Pollack <spoll...@jimmy.harvard.edu>
Sent: Tuesday, April 2, 2019 10:17:57 AM
To: Bioc-devel
Subject: [Bioc-devel] error in bumphunter unit test
Dear Bioconductor,
Our bumphunter package is failing its unit tests fairly spectacularly:
the pval algorithm seems to be returning a data frame full of zeroes.
Unfortunately, I have not been able to reproduce this behavior. I have
instantiated an EC2 instance with the devel AMI, updated all the
packages, installed bumphunter and its dependencies, and run the unit
tests without errors.
My sessionInfo indicates all R dependencies are identical to the
snapshot on the devel build report. However, two things may be causing
the disparity in results:
(i) bumphunter uses 'doParallel' and 'foreach' at the point that it is
failing; is it possible for me to confirm that I am using the same
version of these as the build system used. (Note: we are failing even
when doParallel defaults to sequential execution, so the low-level
interface does not seem to be relevant.)
(ii) The devel AMI is running R 3.6 release 75543 and the build system
is running release 76205. Could this be the discrepancy we're looking
for? We are reluctant to reinstall all of R+Bioc unless it looks relevant.
Any other suggestions would be very helpful. We haven't touched the
package in months and are totally buffaloed why it has decided to fail
just days before the new release.
thanks in advance for any advice you can offer,
- Sam
_______________________________________________
Bioc-devel@r-project.org mailing list
https://stat.ethz.ch/mailman/listinfo/bioc-devel
This email message may contain legally privileged and/or confidential
information. If you are not the intended recipient(s), or the employee or
agent responsible for the delivery of this message to the intended
recipient(s), you are hereby notified that any disclosure, copying,
distribution, or use of this email message is prohibited. If you have received
this message in error, please notify the sender immediately by e-mail and
delete this email message from your computer. Thank you.
[[alternative HTML version deleted]]
------------------------------
Message: 6
Date: Tue, 2 Apr 2019 17:59:44 +0000
From: "Van Twisk, Daniel" <daniel.vantw...@roswellpark.org>
To: "bioc-devel@r-project.org" <bioc-devel@r-project.org>
Subject: [Bioc-devel] Bioconductor 3.9 contributed annotation package
deadline
Message-ID:
<mn2pr12mb287864f7703e40184ca24b97f4...@mn2pr12mb2878.namprd12.prod.outlook.com>
Content-Type: text/plain; charset="utf-8"
Hello Biocondcutor Community!
This is just a friendly reminder that our contributed package deadline for the
upcoming Bioconductor 3.9 release is April 24th.
Also, we plan to have our db0 packages completed by April 8th.
This email message may contain legally privileged and/or confidential
information. If you are not the intended recipient(s), or the employee or
agent responsible for the delivery of this message to the intended
recipient(s), you are hereby notified that any disclosure, copying,
distribution, or use of this email message is prohibited. If you have received
this message in error, please notify the sender immediately by e-mail and
delete this email message from your computer. Thank you.
[[alternative HTML version deleted]]
------------------------------
Message: 7
Date: Tue, 2 Apr 2019 17:03:09 -0500
From: Karl Stamm <karl.st...@gmail.com>
To: bioc-devel@r-project.org
Subject: [Bioc-devel] Vignette Latex error
Message-ID:
<camgeefvgtt9dacrbfe74vd4+ezpb4wr-9lvj0sv-fdynmqv...@mail.gmail.com>
Content-Type: text/plain; charset="utf-8"
I'm having a build error on only the OSX servers.
* creating vignettes ... ERROR
--- re-building ‘rgsepd.Rnw’ using knitr
Error: processing vignette 'rgsepd.Rnw' failed with diagnostics:
Running 'texi2dvi' on 'rgsepd.tex' failed.
LaTeX errors:
! Use of \blx@bbl@verbadd@i doesn't match its definition.
l.142 \verb
The tex file is written by the Rnw with knitr, so maybe it's a knitr
problem, or an incompatibility to the OSX side?? I tried removing
all references to \verb and that doesnt seem to have done anything.
I want to get the package building without errors before the brach
lockdown in a few weeks.
Since it builds on my end just fine, and also on the Windows and Linux
servers, surely it's a build server platform specific problem. Maybe
Knitr is not supported anyone and I need to change everything over to
another RMD format ?
[[alternative HTML version deleted]]
------------------------------
Message: 8
Date: Tue, 2 Apr 2019 21:54:08 -0700
From: Aaron Lun <infinite.monkeys.with.keyboa...@gmail.com>
To: Luke Klein <lklei...@ucr.edu>, bioc-devel@r-project.org
Subject: Re: [Bioc-devel] Call for collaborators/advice
Message-ID: <ad2edc06-02dc-2771-b82f-a3fdbb988...@gmail.com>
Content-Type: text/plain; charset="utf-8"; Format="flowed"
Breaker breaker.
> 1) A package to define a base (virtual) "Interactions" class. This would
> basically have a constant "Vector" store with a "Hits" object specifying
> the pairwise interactions between elements in the constant store. One
> could also distinguish between "SelfInteractions" (constant store) and
> the more general "Interactions" (two stores, possibly of different
> types, e.g., genomic interval -> protein interactions). A variety of
> methods would be available here to do manipulations and such.
https://github.com/LTLA/IndexedRelations (WIP)
> 2) A package to define an "Interactions" subclass where the store is a
> genomic interval, with basic methods to operate on such classes. Methods
> such as findOverlaps(), linkOverlaps() and boundingBox() would probably
> go here. @Luke, a binning method could also conceivably go here.
https://github.com/ComputationalRegulatoryGenomicsICL/GenomicInteractions/issues/37
> All of this is open for discussion, if people are interested and willing
> to volunteer. These changes will not make the next release anyway.
What he said.
-A
> On 22/03/2019 19:54, Aaron Lun wrote:
>> Hi Luke,
>>
>> Do you mean bins or bin pairs?
>>
>> If you want to just bin the coverage in terms of the linear genome,
>> there should be ways to do that outside of InteractionSet or
>> GenomicInteractions. This is just dealing with standard genomic
>> interval data; extract the anchor coordinates and plug it in elsewhere.
>>
>> If you want to collate region pairs into bin pairs; I don't know of a
>> dedicated function to do this from a GInteractions object (diffHic
>> only does this from raw read data). You'll need to figure out what to
>> do to regions that cross bin boundaries.
>>
>> The simplest way to mimic this behaviour right now is to generate
>> another GInteractions object containing ALL POSSIBLE bin pairs (use
>> combn with a constant set of bin regions) and plug that into
>> countOverlaps. This will generate loads of zeroes, though, so is not
>> the most efficient way to do this. You could get a sparser form with
>> linkOverlaps but this requires more work to get the counts.
>>
>> I have some more thoughts about the Bioconductor Hi-C infrastructure,
>> but my laptop battery's running out and I left my charger in my new
>> apartment. So that'll have to wait until tomorrow.
>>
>> -A
>>
>>
>> On 22/03/2019 09:31, Luke Klein wrote:
>>> I am writing a package that will extend the GenomicInteractions
>>> class. I am a statistician, so I may not know best practices when
>>> it comes to extending existing classes (eg. should I make a new slot
>>> or simply add a column to the `elementMetadata`? Are there existing
>>> functions that already do what I am attempting?).
>>>
>>> I am not familiar with Bioc-Devel decorum, so if asking this here is
>>> inappropriate, kindly let me know.
>>>
>>> About my project:
>>>
>>> In the first step, I am hoping to implement a HiC binning function on
>>> HiC data contained in a GenomicInteractions set. I aim to:
>>>
>>> - Reorder the anchor pairs (I will explain in more detail to anyone
>>> that wants to help)
>>> - Collapse the regions to the desires bin width
>>> - Sum the counts within each bin
>>> - Update the anchors to agree with the new/updated regions
>>>
>>> This will set the stage for the new class that I hope to create for
>>> HiC domain calling, but I need to achieve the above tasks first.
>>>
>>> All the best to everyone!
>>>
>>> —*Luke Klein*
>>> PhD Student
>>> Department of Statistics
>>> University of California, Riverside
>>> lklei...@ucr.edu <mailto:lklei...@ucr.edu>
>>>
>>>
>>>
>>>
>>>
>>>
------------------------------
Message: 9
Date: Wed, 3 Apr 2019 05:19:07 +0000
From: Stephen Martin Pederson <stephen.peder...@adelaide.edu.au>
To: "bioc-devel@r-project.org" <bioc-devel@r-project.org>
Subject: [Bioc-devel] How to define S4 method for class from another
package
Message-ID:
<me2pr01mb2338cb17962ddfc827683856d4...@me2pr01mb2338.ausprd01.prod.outlook.com>
Content-Type: text/plain; charset="utf-8"
Hi,
I'm really struggling with how to use an S4 class defined in another package,
where I would like to define a method for it in my package. By way of simple
example, I'd like to use a DNAStringSet to define an expected GC distribution
based on a given fragment size. I had defined the method
setMethod("getGcDistn", "DNAStringSet", function(myArgs){myBody})
after using setGeneric() to define the generic getGcDistn.
When submitting to BioC, I was advised that this is not permissable & I'm
trying to figure out what is the best etiquette & best practice. I haven't
really turned up much guidance through numerous searches. Do I just write a
standard function which checks the class and executes the code as required
without using S4 dispatch?
(Disclaimer: I'm very easily confused by the simplest things)
Thanks in advance,
Steve
[[alternative HTML version deleted]]
------------------------------
Subject: Digest Footer
_______________________________________________
Bioc-devel mailing list
Bioc-devel@r-project.org
https://stat.ethz.ch/mailman/listinfo/bioc-devel
------------------------------
End of Bioc-devel Digest, Vol 181, Issue 2
******************************************
_______________________________________________
Bioc-devel@r-project.org mailing list
https://stat.ethz.ch/mailman/listinfo/bioc-devel
